Re: to all people that can run dvbd

[Martin Edlman <edlman@fortech.cz>]

Nikolay Ivanchev wrote:
> 
> Transponder     113 -> 194.177.32.11
>                              114 ->                         .44
>                               115 ->                         .171
>                                103 ->                        .196
> 
> it is on EON site but cannot remember where exactly
> btw you will have to log in with your name and pass and on the right side
> of the screen there are link to the page
> that contains new proxy servers

Thanks, it was my fault, I have find it on the EON web. Ok.
But I have still a problem. I have downloaded dvbrouter.tar.gz, new
dvbd2.tar.gz posted to the list and run dvbd with default config file
(configured for TR 115).

I suppose I should be able to ping respective proxy server which is
194.177.32.171 - but I get no answer. Obviously I cannot 'telnet
194.177.32.171 8080'. Am I missing something?

My /etc/dvbd.conf
# DVB receiver configuration file, (c) 2000 data planet international
#
# standard location in /etc
#
# LNB power on=1/off=0
power 1
#
# symbol rate [symbol/sec]
#
# ASTRA 1E/1F
# symbolrate 27500000
#
# ASTRA 1G/1H
symbolrate 22000000
#
# frequency [kHz]
#
# ASTRA TR 103
# frequency 12461000
#
# ASTRA TR 115
frequency 12662750
#
# ASTRA TR 114
# frequency 12640000
#
# ASTRA TR 113
# frequency 12632250
#
# 22 kHz signal on=1/off=0
ttk 1
#
# diseqc on=1/off=0
diseqc 0
#
# AFC on=1/off=0
AFC 1
#
# polarisation H=1/V=0
polarisation 1
#
# settings for MPE filter, PID and MAC filtering, valid MAC bytes
filter_0 512
# filter_1 785
# filter_2 786 01:00:5E:01:0A:01 31
# filter_3 xxx
# filter_4 xxx
# filter_5 xxx
# filter_6 xxx
# filter_7 xxx
# filter_8 xxx
# filter_9 xxx

When I run dvbd in foreground I get following list on my screen:
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 239 Nest
= 6144
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 271 Nest
= 6144
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 255 Nest
= 6912
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 191 Nest
= 6144
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 287 Nest
= 6656
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 255 Nest
= 5888
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 207 Nest
= 6144
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 191 Nest
= 6912
Fsync = 0, Freq = 2062750000, Sync = 127 Afc = 4293936046 Agc = 367 Nest
= 6144
Vber = 0    

When I run dvbd in background (with -q option) the /var/log/messages
contains:
May 16 09:11:30 cache2 dvbd[12958]: Local ip is 194:213:233:9 
May 16 09:11:31 cache2 dvbd[12958]: Sync[127]: ok

I use eth0 device for terrestrial Internet access and dvb0 for sattelite
connection, so I didn't modified dvbd.c.
Suggestion to the dvbd authors: it would be great to allow user to
specify these devices in the config file and not to modify source file.

-- 

Martin Edlman
Fortech s.r.o, Litomysl
Public PGP key: http://edas.visaci.cz/#pgpkeys