Re: OSD and images -> RGB out

[Matjaz Thaler <matjaz.thaler@rd.iskraemeco.si>]

Ralph Metzler wrote:

> Sorry, but the hardware does not support it (and I asked the people who should know).
> Only 50 Hz are supported with PAL-BGI and you will only get the first
> 3/4 of the screen filled (but in color!). Still, if anyone is
> interested in that mode I can add it.
> There also is PAL-M with 60Hz but that comes out black/white on my TV.

This was mentioned on this list few weeks ago:

 > 3. Internal Connector (DVB-S)
 >
 > There is a two row connector(10pin) on the DVB Sat version:
 > Pin definition (pin1 shows an arrow)
 > CVBS (Composite)     1   -   2       VCC
 > Blue out             3   -   4       SPDIF out
 > Green out            5   -   6       Audio Right out
 > Red out              7   -   8       Audio Left out
 > not con.             9   -   10      Ground

Direct RGB connection is good solution for different color standards
and the best picture can be achieved using this connection.
I tested it and it's really great.

Matjaz