Re: help me in order to receive my Internet via EON

[xcuse@DSI-Project.de]

    [ Part 1, Text/PLAIN (charset: Unknown "Windows-1252")  70 lines. ]
    [ Unable to print this part. ]

    [ The following text is in the "Windows-1252" character set. ]
    [ Your display is set for the "ISO-8859-1" character set.  ]
    [ Some characters may be displayed incorrectly. ]

hi guenther,
if you are behind a masq-gateway it is a little bit more complicated,
some time ago on linuxtv.org was a HOWTO exactly for what you are trying
to
do. I don´t know if it is still there. the only thhong I can tell you is
that your config can´t work, cause the internetstream you want to receive
is
adressed to your   mac-adress whitch is dynamically calculated from your
ip-adress you get from your provider, that is why you have to start dvbd
after connecting. You can´t receive any ping from 196.177.32.196 because
the
ping comes over satellite.
I remember that your problem could be solved with iptunel or something
like
that, but it is all descibed in the HOWTO.
good luck.

xcuse


----- Original Message -----
From: "Uwe Guenther" <uwe@cscc.de>
To: <xcuse@dsi-project.de>
Cc: "Uwe Guenther" <uwe@cscc.de>; <linux-dvb@linuxtv.org>
Sent: Saturday, September 23, 2000 2:47 PM
Subject: Re: help me in order to receive my Internet via EON


> On Sat, 23 Sep 2000 xcuse@DSI-Project.de wrote:
>
> > try using TP103.
> > you have to set up
> > proxy 194.177.32.196 port 8080 in IE or Netscape
> > download dvbd2 from linuxtv.org
> > you have to edit dvbd.h:
> > '#define dvb_netdevice "your net device (to internet)'
>
> the defaults are ok my internetdev is eth0 and the dvbddev is dvb0
>
> > just do a make
> > copy the dvbd.conf i´ve attached into /etc
> > open internet connection, then start dvbd
> > if you get a loginprompt, everything is allright!
>
> it does not work...
>
> I have a diseqc-box and i tried "tkk 0" and "diseqc 1", but it does
> not help :(( .
>
> How does dvbd2 work???
>
> my eth0 has the ip 192.168.1.50 and is connected via linuxrouter
> with masquerading to the internet. The router has the IP
> 192.168.1.40 on eth0 and it gets a dynamic IP on ippp0. This my
> Harware.
>
> Why does I need the MAC-Adress in the Filter??
>
> by Uwe
>
> --
> Uwe Günther                    \\://                 
mailto:uwe@cscc.de
> Haupstraße 88                  (o -)                 
http://www.cscc.de
> 98631 Behrungen          ---ooO-(_)-Ooo---         
tel.:+49.36944.54448
> Germany                                       Linux, enjoy the ride
...!