[linux-dvb] [hz-gb-2312] ~{4p84~}: [linux-dvb] ~{;X84~}: [linux-d[hz-gb-2312] vb] Some Questions About the Fujitsu-Sieme[hz-gb-2312] ns DVB-C PCI Card Driver .71

[ZZZ <zou.zzz@263.net>]

    [ The following text is in the "hz-gb-2312" character set. ]
    [ Your display is set for the "ISO-8859-1" character set.  ]
    [ Some characters may be displayed incorrectly. ]

~{UTN!#,~}
	~{Dc:C#,JU5=Dc5D@4PEUfSPK|OgSv9JV*5D8P>u#,KdH;DcNR6<JGTZ9zDZ#,:G:G!#~}
	~{NRTZIO:#9$Ww#,>MOqNRTZPE@oP45@5DNRV;JG<r5%5DPhR*R;8v;ySZ~}DVB-C~{5D4sSZ~}30MBit~{5DJ}>]PE5@!#DcD\9;~}Email~{8xNRDcCG9+K>5DO5M35DR;P)WJAOC4#?1HHg#,UbVVJ}>]M(PEDcCGJGM(9}~}IPMPE~{;9JGFdK{5D7=J=#?DcCG5D=SJU?(D\9;BzWc~}30Mbit~{5D4+JdKYBJC4#?!#!#!#~}
	~{NROVTZ>MJGSC~}Viewgraphics~{5D~}ASI~{?(7"KM#,~}Siemens PCI ~{?(Ww=SJU!#~}

	~{EN84~}	
													~{W^P!?!~}

-----~{T-J<SJ<~~}-----
~{7"<~HK~}: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]~{4z1m~} Zhao Wei
~{7"KMJ1<d~}: 2000~{Dj~}11~{TB~}23~{HU~} 9:36
~{JU<~HK~}: linux-dvb@linuxtv.org
~{VwLb~}: [linux-dvb] ~{;X84~}: [linux-dvb] Some Questions About the
Fujitsu-Siemens DVB-C PCI Card Driver .71


Dear Zou,

I am in China also. Our company, Beijing Compunicate Technologies Inc., has
developed products of DVB-C(S) PCI cards as well as frontends equipped with
ASI output.

With our solution, all problems you met could be easily settled. Our system
is now running under MS Windows, and, if necessary, can be ported to Linux
with some efforts. If you are developing such a system for commercial
purpose, maybe we can find possibilities of cooperation.

Best regards,

Wei Zhao
~{UTN!~}
Tel:10-62620737, 13601154710
Fax:10-62620738


-----Original Message-----
~{7"<~HK~}: ZZZ <zou.zzz@263.net>
~{JU<~HK~}: linux-dvb@linuxtv.org <linux-dvb@linuxtv.org>
~{HUFZ~}: 2000~{Dj~}11~{TB~}23~{HU~} 4:56
~{VwLb~}: [linux-dvb] Some Questions About the Fujitsu-Siemens DVB-C PCI Card
Driver .71


I'm doing some develop on my Fujitsu-Siemens DVB-C PCI Card using linux
driver 0.71.I just want to obtain a more Than 30Mbit/second DATA transmit
channel,for I want to transmit Packlized DATA infomation(some like
HTML,PDF,GIF,...)from frontend(I'm using a Viewgraphics Mediapump Card) to
the headend.There are some problems that I can't get across.I wonder if
someone can help me out of the trouble.My questions are list below:
    1. You know that using QAM-64 we can obtain a digital transmit channel
of more than 30Mbit/second.Can I use all the bandwidth to transmit MPEG TS
or other DATA?
        1.1 I've tried to transmit a MPEG Transport Stream at a speed much
higher than its decoding speed,but I can only receive a little part of the
Stream. e.g. I send a 6Mbit/second MPEG Transport Stream at a speed of
30Mbit/second,but I can only receive 6MByte over 10 seconds.
    2. How can I receive the original MPEG TS but not the packed AVPES~{#?~}
    3. How can I transmit DATA through the Card?Can you give me some
references about the DATA transmit structures(IPMPE or DATA PIPING) and the
frontend design?