[linux-dvb] Re: CAM,CI with linux?

[Gregoire Favre <greg@ulima.unil.ch>]

On Wed, Dec 20, 2000 at 08:39:20PM +0100, Gregoire Favre wrote:
> On Wed, Dec 20, 2000 at 07:23:22PM +0100, Gregoire Favre wrote:
> 
> I have forgotten to say that I am on kernel 2.4.0-test12, driver 0.8 vdr 0.68...
> Anyway, when I want to use tuzap, I got:
> Could not open /dev/ost/qpskfe0

Of course, I hadded forgotten to run the makedev.napi (well I use devfs, so such things are really
easy to forgot...).

Now just before I do the make insmod, I do the makedev.napi... and vdr is working, for changing to
the first channel, and then showing the info of the next one, but without switching the channels,
and the info stays all the time: I could play a DVD with the OSD of Sat.1 still over it ;-(

Here's from dmesg:
i2c-core.o: i2c core module
Linux video capture interface: v1.00
saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd0a32000.
VES1893: attaching VES1893 at 0x10 to adapter saa7146(1)
tuner: chip found @ 0x61
dvb: ARM firmware successfully loaded.
dvb: firmware = f0240009
dvb: MAC = 00 d0 5c 00 41 90 
outcommand error 1
outcommand error 1
outcommand error 1
dvb: 1 dvb(s) found!
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.48 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 00:0b.0
PCI: The same IRQ used for device 00:0b.1
bttv0: Bt878 (rev 2) at 00:0b.0, irq: 5, latency: 32, memory: 0xe2000000
bttv0: subsystem: 0070:13eb  =>  Hauppauge WinTV  =>  card=10
bttv0: model: BT878(Hauppauge new (bt878)) [insmod option]
bttv0: Hauppauge msp34xx: reset line init
tuner: chip found @ 0x61
bttv0: i2c attach [i2c tv tuner chip]
msp34xx: init: chip=MSP3410D-B4, has NICAM support
msp3410: daemon started
bttv0: i2c attach [MSP3410D-B4]
bttv0: Hauppauge eeprom: model=37284, tuner=Philips FM1216 (5)
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
bttv0: i2c attach [tda9840]
lirc_dev: IR Remote Control driver registered, at major 61 
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
bttv0: i2c attach [Hauppauge IR]
bttv0: PLL: 28636363 => 35468950 ... ok
outcommand error 1
outcommand error 1
commandrequest error
dvb: filter shutdown error :49151
outcommand error 1
dvb: filter shutdown error :0
commandrequest error
dvb: filter shutdown error :0
outcommand error 1
outcommand error 1
outcommand error 1
outcommand error 1
outcommand error 1
outcommand error 1
outcommand error 1
dvb: filter shutdown error :16
...
outcommand error 1
commandrequest error
dvb: filter shutdown error :0
commandrequest error
dvb: filter shutdown error :49151
outcommand error 1
dvb: filter shutdown error :4
outcommand error 1
dvb: filter shutdown error :0
outcommand error 1
outcommand error 1
dvb: filter shutdown error :120


Any idea why I have those problem?

Many thanks,

	Greg
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch


--- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with unsubscribe as subject.