[linux-dvb] Re: Satelco DVB-S driver problem

[Klaudius.Chlebosch@t-online.de (Klaudius Chlebosch)]

Hi Holger,

i have no idea which 'chip' you mean, but will try to describe the card:

1. out of the metal box: 1 IC Philips SAA 7146A H, CG0532.00, kt0222V3
2. on the metal box: SU1278/SH, 3112 297 12871, 214 HJ11 GA00136
3. inside the metal box nearly unreadable: STV0299B, T041007, T221L0124, MALTA
4. on the borad: TT2002.9, B2S1100, Rev.1.0

Can you indentify the frontend chip ? I suppose its the one in the metal box 
( STV0299B ) ?

mfg -kc-

Am Sonntag, 22. Dezember 2002 11:50 schrieben Sie:
> Hi Klaudius,
>
> Can you please tell me what frontend is soldered on this card?
>
> Holger
>
> Klaudius Chlebosch wrote:
> > Hi List,
> >
> > i have problems getting my new Satelco DVB-S Standard PCI to work. It
> > looks like a TT-Budget in a newer revision.
> >
> > I checked this out with the new driver from 1.11.2002 and 8.12.2002 from
> > Klaus Schmiedingers hompage and a cvs checkout on 21.12.2002 => all the
> > same.
> >
> > I had to modify the file saa7146_core.c to get the driver loaded. I added
> > the following lines:
> >
> > static struct card_info ttbsk  = { DVB_CARD_TT_BUDGET,
> > "TT-Budget/WinTV-NOVA-S/KCH  PCI" };
> >
> > ...
> >
> > 	{ PHILIPS_SAA7146, 0x13c2, 0x100f, CARD_INFO ttbsk },
> >
> > Some info:
> >
> > lspci -v
> >
> > ...
> > 00:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> >         Subsystem: Technotrend Systemtechnik GmbH: Unknown device 100f
> >         Flags: bus master, medium devsel, latency 32, IRQ 11
> >         Memory at de002000 (32-bit, non-prefetchable) [size=512]
> > ...
> >
> > cat /proc/pci
> >
> > ...
> >   Bus  0, device  12, function  0:
> >     Class 0480: PCI device 1131:7146 (rev 1).
> >       IRQ 11.
> >       Master Capable.  Latency=32.  Min Gnt=15.Max Lat=38.
> >       Non-prefetchable 32 bit memory at 0xde002000 [0xde0021ff].
> > ...
> >
> > The enties in the log file ( with saa7146_debug=3 ):
> > ...
> > Dec 21 18:52:04 rascal kernel: Linux video capture interface: v1.00
> > Dec 21 18:52:05 rascal kernel: saa7146_init_module
> > Dec 21 18:52:05 rascal kernel: saa7146_init_one()
> > Dec 21 18:52:05 rascal kernel: DVB: registering new adapter
> > (TT-Budget/WinTV-NOVA-S/KCH  PCI).
> > Dec 21 18:52:05 rascal kernel: saa7146_core.o: ==> configure_saa7146
> > Dec 21 18:52:05 rascal kernel: saa7146: rvmalloc called, quant:2
> > Dec 21 18:52:05 rascal kernel: saa7146: alloc page tables
> > Dec 21 18:52:05 rascal kernel: saa7146: clear RAM
> > Dec 21 18:52:05 rascal kernel: saa7146: build page tables
> > Dec 21 18:52:05 rascal kernel: saa7146: page tables built
> > Dec 21 18:52:05 rascal kernel: saa7146_core.o: : bus:0, rev:1,
> > mem:0xe0c3c000. Dec 21 18:52:05 rascal kernel: saa7146_core.o:
> > master_xfer called, num:2 Dec 21 18:52:05 rascal kernel: saa7146: ==>
> > i2c_reset
> > Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000400
> > Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000400
> > Dec 21 18:52:05 rascal kernel: saa7146: i2c_reset: error_state detected,
> > status:0x00000400
> > Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000100
> > Dec 21 18:52:05 rascal kernel: saa7146: ==> writeout: 0xd000d1ec (before)
> > (to:100)
> > Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_busy_rise_and_fall
> > Dec 21 18:52:05 rascal kernel: saa7146: i2c_busy_rise_and_fall; rise wait
> > 5 Dec 21 18:52:05 rascal kernel: saa7146: ==> i2c_status_check:0x00000101
> > Dec 21 18:52:05 rascal kernel: saa7146: i2c_busy_rise_and_fall; fall wait
> > 100 Dec 21 18:52:05 rascal kernel: saa7146: ==>
> > i2c_status_check:0x00000101 Dec 21 18:52:05 rascal kernel: saa7146:
> > i2c_busy_rise_and_fall; fall wait 99 Dec 21 18:52:05 rascal kernel:
> > saa7146: ==> i2c_status_check:0x00000100 ...
> >
> > the message that this card gets the IRQ thisanthat is missing, This might
> > be the problem. I removed all other cards from the system and checked the
> > other pci slots... still does not work.
> >
> > I bought another Satelco card in summer and it works without problems (
> > the board ist definitly different ) with the old driver and a FSC 1.3 in
> > a sparate PC. I dont believe, that the PC is the problem, i tested the
> > FSC and the working satelco card in the same PC, where the new satelco
> > card does not work.
> >
> > The card works with win98 without problems. Maybe this is a new board
> > revision, which is not fully supported ? Are thre any drive parms which
> > might by helpfull ? Any idea is welcome...
> >
> > mfg -kc-

-- 
Klaudius Chlebosch, Steigerwaldstr. 18, 71083 Herrenberg, Germany : 
+49-7032-508023
email: Klaudius.Chlebosch@t-online.de


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.