[linux-dvb] Re: [Cooker] DVB and TMB Kerel

[Steffen Barszus <st_barszus@gmx.de>]

Am Dienstag, 2. September 2003 23:35 schrieb Michael Lothian:
> Quoting Steffen Barszus <st_barszus@gmx.de>:
> > Am Dienstag, 2. September 2003 16:05 schrieb Thomas Backlund:
> > > Michael Lothian kirjoitti viestissään (lähetysaika Tiistai 2.
> > > Syyskuuta 2003
> > >
> > > 15:35):
> > > > Quoting Steffen Barszus <st_barszus@gmx.de>:
> > > > > probeall /dev/dvb dvb-ttpci
> > > > > alias /dev/dvb/* /dev/dvb
> > > > > below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7
> > > > > add below dvb-ttpci grundig_29504-401 grundig_29504-491
> > > > > add below dvb-ttpci stv0299 ves1820
> > > > >
> > > > > the same i posted just two or three times ;)
> > > >
> > > > Well for the second or third time this doesn't work ;) It
> > > > complains about the grundig_29504-401 driver. I tried removing
> > > > this, at startup lsmod | grep dvb shows nothing. modprobe
> > > > dvb-ttpci will load the drivers however
> > > > /dev/dvb/adapter0/fronend0 is still missing.
> >
> > Seems that sympa is eating mail . I haven't read that this doesn't
> > work for you.
> >
> > > > I can get it to appear using
> > > >
> > > > >>alias char-major-250 dvb
> > > > >>alias dvb dvb-ttpci
> > > > >>below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7
> > > > >>add below dvb-ttpci tda1004x
> > > > >>add below dvb-ttpci stv0299 ves1820
> > > > >>options dvb-core dvb_shutdown_timeout=0
> >
> > I will search the dvb-mailinglist about this.
> >
> > > > However I still have to modprobe dvb-ttpci each time I boot up
> > > > the pc.
> >
> > Ok. From what i see the difference is on module tda1004x, it is in
> > your entry but not in mine. So could you try the following:
> >
> > probeall /dev/dvb dvb-ttpci
> > alias /dev/dvb/* /dev/dvb
> > below dvb-ttpci alps_bsrv2 alps_tdmb7 alps_tdlb7
> > add below dvb-ttpci grundig_29504-401 grundig_29504-491
> > add below dvb-ttpci stv0299 ves1820 tda1004x
> >
> > I have no clue if
> > alias char-major-250 dvb-ttpci
> > is necessary. Maybe other know that better then me. the above is
> > still working for me.
> >
> > Regards
> >
> > Steffen
>
> Using exactly what you have written above /dev/dvb doesn't appear at
> boot. I have to type in modprobe dvb-ttpci.
>
> Without the tda1004x /dev/dvb doesn;t appear at boot. When modprobe
> dvb-ttpci is loaded /dev/dvb appears however there is no
> /dev/dvb/adapter0/fronend0 (the above has this.
>
> I stream using...
>
> dvbstream -f 570000 -c 0 -o -qam 16 -cr 2_3 -I 0 -ps 201 202 |
> mplayer -cache 4096 -
>
> However everytine I do this
>
> Sep  2 22:21:52 localhost kernel: tda1004x_init: Unable to open
> firmware /etc/dvb/tda1004x.mc
>
> appears in /var/log/messages
>
> Strange that without the tda1004x frontend it doesn;t work yet with
> it, it works but doesn't use the frontend (I don't think)
>
> Any suggestions?


I guess something for linux-dvb mailinglist ? :(  Have the modules.conf 
entries to be different depending on the device ? That would be the 
opposite , from what i have understood about it. 

Steffen


--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.