[linux-dvb] Re: aver dvb-t

["Mark Edwards" <mark@edwards.homelinux.net>]

you're missing the sp887x.o frontend driver....

Mark
----- Original Message -----
From: "Itai Tavor" <itai@iinet.net.au>
To: <linux-dvb@linuxtv.org>
Sent: Friday, January 09, 2004 1:19 PM
Subject: [linux-dvb] Re: aver dvb-t


>
> On 07/01/2004, at 9:00 PM, Hai Tran wrote:
>
> > I finally got the aver dvb-t card working two days ago, I am now
> > trying to get the ttusb_dec working.
> >
> > When I had the aver dvb-t card working I was running
> >
> > Mandrake 9.2, kernel 2.4.23, with the patches from bytesex.org. I
> > used the dvb-kernel/build-2.4 CVS build from 4 days ago.
> >
> > I initially had problems getting the card to work, two issues I found,
> > that once resolved fixed up my problems.
> >
> > 1.  bttv version
> > 2.  missing firmware in /etc/dvb/
> >
> > Onced fixed, I could view the dvb-broadcast with Xine
>
> I've been trying to get my Aver DVB-T to work for weeks. I'm using
> Fedora Core 1 with kernel 2.4.23-epia1, dvb-kernel updated just now
> from CVS and video4linux-20040107. I get this on startup:
>
> bttv: driver version 0.9.12 loaded
> bttv: snapshot date 2004-01-07
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> bttv0: Bt878 (rev 17) at 00:14.0, irq: 10, latency: 32, mmio: 0xe2003000
> bttv0: subsystem: 1461:0761 (UNKNOWN)
> please mail id, board name and the correct card= insmod option to
> kraxel@bytesex.org
> bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=009c00dd [init]
> i2c-core.o: adapter bt878 #0 [hw] registered as adapter 0.
> bttv0: using tuner=-1
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> bttv0: registered device video3
> bttv0: registered device vbi0
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> bt878(0): Bt878 (rev 17) at 00:14.1, irq: 10, latency: 32, memory:
> 0xe2004000
> DVB: registering new adapter (Ave).
> i2c-core.o: driver i2c TV tuner driver registered.
> i2c-core.o: driver saa7115 registered.
> saa7114.c: starting probe for adapter bt878 #0 [hw] (0x10005)
>
> and tzap returns:
>
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> ERROR: failed opening '/dev/dvb/adapter0/frontend0' (No such device)
>
> I don't know why bttv still fails to recognize the card type. I tried
> modprobe bttv card=105 (found that number is someone's forum post) but
> got the same result.
>
> Any tips on what I should do now?
>
> TIA, Itai
>
>
> --
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe
linux-dvb" as subject.
>
>



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.