[linux-dvb] No output under 2.6

[theshining@t-online.de (Thomas Fricke)]

Hi,

tested the new kernel the last few days and the only thing I can't get 
to work are the dvb drivers (dvb-kernel from cvs 09.01.04)

The problem:
after loading the modules I can't get video and audio output from 
applications. mplayer -vo mpegpes just stops playing after showing the 
status line. VDR ends before switching to the first channel.

The modules are all loaded and the log looks fine for me. Right after 
loading the modules I can see the copyright on tv out, but then nothing 
else.

the szap output looks quite similar as under 2.4. So the tuner seems to 
be ok.

All devices are under /dev/dvb/adaptor0/ and readable by applications 
(no error messages)

The Card works just fine under 2.4 with drivers linux-dvb.2003-11-08.


Any hints?


bye...
Thomas



Kernel:2.6.0 with dvb-kernel from cvs (makelink)
Gentoo Linux 1.4.
DVB-Card: Hauppauge Nexus S Rev. 2.2

kernel and vdr logs:

[kernel] Linux video capture interface: v1.00
[kernel] saa7146: register extension 'dvb'.
[kernel] DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1).
[kernel] Technotrend/Hauppauge PCI rev2.1 adapter 0 has MAC addr = 
00:d0:5c:20:94:45
[kernel] DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, 
app 8000261a
[kernel] DVB: AV7111(0) - firmware supports CI link layer interface
[kernel] av7110(0): Crystal audio DAC detected
[kernel] videodev: "av7110" has no release callback. Please fix...
[kernel] av7110: found av7110-0.
[kernel] probe_tuner: try to attach to Technotrend/Hauppauge PCI rev2.1
[kernel] drivers/media/dvb/frontends/stv0299.c: setup for tuner BSRU6, 
TDQB-S00x
[kernel] DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...


[vdr] VDR version 1.2.6 started
[vdr] loading /usr/local/video2/sources.conf
[vdr] loading /usr/local/video2/diseqc.conf
[vdr] loading /usr/local/video2/channels.conf
[vdr] loading /usr/local/video2/svdrphosts.conf
[vdr] loading /usr/local/video2/ca.conf
[vdr] loading /usr/local/video2/keymacros.conf
[vdr] found 1 video device
[vdr] setting primary device to 1
[vdr] SVDRP listening on port 2001



--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.