[linux-dvb] Re: Idea how to get Aver dvb-t 771 Remote Control to work?

[Matt Jesson <dvb@jesson.eclipse.co.uk>]

Try getting the latest V4L from bytesex.org.

I made some changes there a while back but have been waiting for 
someone with the 771 card to ask. I've got the 761 card and that code 
works great for me. It doesn't require the lirc driver. Although some 
tweaking is still be required to map keys to those expected by Myth.

If you look at ir-kbd-gpio.c. At line 326, there is a case statement. 
Try uncommenting the
/* case BTTV_AVDVBT_771: */
also in bttv-cards.c line 2078, the '#if 0' needs to be set to '1'.
Rebuild and install.

The mask seen there is correct for the 761 card, but I haven't been 
able to test the 771 version. Now, with a bit of luck, once the modules 
are running (remembering to run the ir-kbd-gpio module) you should get 
key events when you press keys on the remote.

If you don't, double check that everything is running by looking at 
/proc/bus/input/devices. If everything is fine you'll need to work out 
the correct values for 'ir->mask_keycode' and 'ir->mask_keydown'. Not 
rocket science, adding a printk did the job for me.

I'd also be interested to find out whether the remote control key codes 
are listed correctly in the ir-kbd-gpio.c KEY_ table (line 78).

I hope this helps.

Matt



On Monday, Jul 19, 2004, at 18:04 Europe/London, Ben Rometsch wrote:

> Hi Andreas,
>
> Is there a howto or step-by-step guide on getting the remote working? 
> I'm
> running a 2.6.7 kernel - have the 771 card working perfectly in MythTV 
> but
> don’t know where to start with respect to getting the remote working 
> under
> Myth?
>
> Thanks,
> Ben
>
> -----Original Message-----
> From: linux-dvb-bounce@linuxtv.org 
> [mailto:linux-dvb-bounce@linuxtv.org] On
> Behalf Of Torbjörn Jansson
> Sent: 16 July 2004 11:58
> To: 'Andreas Witte'; linux-dvb@linuxtv.org
> Subject: [linux-dvb] Re: Idea how to get Aver dvb-t 771 Remote Control 
> to
> work?
>
> linux-dvb-bounce@linuxtv.org <> wrote:
> > Hi All!
> >
> > Is that more a topic for video4linux mailinglist?
> >
> > Ive grabbed a late cvs from lcd4linux, uncomment the if-expression in
> > ir-kbd-gpio.c and install the modules. If i insert that module, i get
> > really crazy "Unknown key pressed" - errors, without pressing anything
> > on the remote control - but it seems, this module is watching for a
> > sensor or kindof (isa0060/serio0).
> > Pushing buttons on the remote control do nothing.
> >
> > Maybe this module is watching for false sensor or anything like that?
> > Can i give any parameters with that module?
> >
> > Im not sure its really well placed in this mailinglist. Sorry if its
> > not.
> >
> > Regards,
> > Andreas
> I think there is a config program where you can configure the keys 
> that is
> generated when you press a key on the remote.
> If the default keytable in the module doesn’t have anything configured 
> about
> the remote button, it will print those unkown key messages in the 
> kernel
> log.
>
> Take a look at http://dl.bytesex.org/cvs-snapshots/ input-<date>.tar.gz