[linux-dvb] Re: RE : dvbscan not working?

[Martin Saldert <9e@evil-zone.com>]

Eric DEZERT wrote:

> Are you sure you loaded the dvb drivers coming from www.linuxtv.org
> With my debian 2.6.6, the release of scan available on cvs only works
> with the drivers also available in cvs, and not with the drivers from
> the 2.6.6 kernel.
>
>  
I have 2.4 kernel and a week ( or 2 ) old CVS of the dvb drivers.

/Martin Saldert



> -----Message d'origine-----
> De : linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org]
> De la part de Martin Saldert
> Envoyé : mardi 3 août 2004 12:06
> À : dvb
> Objet : [linux-dvb] dvbscan not working?
>
> I used the "scan"  tool about a month ago to scan for my DVB channels.
> Everything worked fine.
>
> Now its time for the olympics and i will get some extra channels for
> that.
> So i figured that i rescan to find them.
>
> But i cant tune with dvbscan :-(
>
> # ./dvbscan dvb-t/se-hbg > channels.conf
> scanning dvb-t/se-hbg
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 482000000 0 2 0 3 1 2 0
> >>> tune to: 
> 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMI
> SSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>
> So i figured i download the old scan software.
> Now i try to run "scan" but i get the same problem.
>
> # ./scan dvb-t/se-hbg > channels.conf
> scanning dvb-t/se-hbg
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 482000000 0 2 0 3 1 2 0
> >>> tune to: 
> 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMI
> SSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> WARNING: >>> tuning failed!!!
>
> The channels should be there.
> I found them there before with "scan".
> And i can watch them in Mythtv.
>
> Any ideas?
>
> /Martin Saldert
>
>
>
>
>