[vdr] Re: 1.1.13 - simple diseqc question

[Dariush Forouher <dariush@forouher.de>]

Am Son, 2002-10-27 um 13.21 schrieb Rene Bartsch:
> > That doesn't work with my switch. This is the easiest working config
> > I've fount:
> > S19.2E  11700 V  9750 t v # 1st LNB
> > S19.2E  99999 V 10600 T v
> > S19.2E  11700 H  9750 t V
> > S19.2E  99999 H 10600 T V
> > S13E    11700 V  9750 t v [E0 10 38 F4] t #2nd LNB
> > S13E    99999 V 10600 t v [E0 10 38 F4] T
> > S13E    11700 H  9750 t V [E0 10 38 F4] t
> > S13E    99999 H 10600 t V [E0 10 38 F4] T
> >
> > In the "manual" of the switch is written, that it only supports diseqc
> > 1.0. Could this be the reason?
> >
> 
> No, the above Hex-commands are diseqc 1.0.
> You're only using 22khz/13V/18V at ASTRA to switch (very slow ...)
> 
> I assume you're running a 9/x-multiswitch with two quaddro-LNBs, first
> directed to ASTRA and the second to HOTBIRD?
No, I'm using two Switchable-LNBs(Astra&Hotbird on multifeed) connected
to a "2 in, 1 out" switch. (Axina spu 21-02 by reichelt).
I would really prefer a faster solution, but using diseqc commands only
doesn't seem to work with this device.

ciao
Dariush
-- 
PGP Fingerprint: 0x886C99A1



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.