[vdr] Re: problems with rgb cable

["M Meddaugh" <meddo@gmx.net>]

> M Meddaugh wrote:
> > I made a J2 connection cable using a ribbon cable a few db-9 plugs and a
> > scart cable. The picture is pretty good and now I have color with my
ntsc
> > vcd's. The problem is there are squiggly lines in the background. Not
like
> > background noise due to a bad cable but more of a perfect pattern of
tiny
> > lines. I checked and rechecked the cable. So I was wondering if maybe
its
> > normal? It seems strange that I have a better picture with composite
out.
> > Any ideas?
> Same problem here. But you're only the second one I've heard of. Maybe
> the output of the card is damaged. I plugged out the connector to the
> tv-set while tv and computer were powered on.
I have 3 ntsc consoles hooked up to the scart input on the tv so the tv
should be ok. I was thinking maybe it was the 5+ that was causing it since I
am using a dreamcast scart cable that had a resistor already. But I removed
the 5+ altogether and switched to AV manually on the tv with the same
effect. This is also the second ribbon cable I am trying as I thought the
first one was poor quality.



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.