[vdr] AW: "video data stream broken" running vdr without connection to LNB

["just4all" <just4all@gmx.de>]

Hi,
I do not get this message when disconnecting my dvb-c from cable network
but this message "video stream broken" causes the reboot of vdr.
As it seems with your configuration it's not possible to run vdr without
a dish.

-----Ursprüngliche Nachricht-----
Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org] Im Auftrag
von Michael Nausch
Gesendet: Samstag, 28. Dezember 2002 22:20
An: vdr@linuxtv.org
Betreff: [vdr] "video data stream broken" running vdr without connection
to LNB

Griaseichallemidananda!

English isn't my foreign language, so I try to do my best! :-)

This days I'm working on my first vdr-box. My SAT-antenna isn't
installed jet, 
so I tried to use VDR as an DVD player first. I hope I can do this ...

After starting runvdr, vdr crashes down every few minutes. In 
/var/log/messages are written those lines:

<import>
Dec 28 20:21:56 vdr vdr[1289]: KBD remote control thread started
(pid=1289)
Dec 28 20:21:56 vdr vdr[1267]: remote control KBD - keys known
Dec 28 20:21:56 vdr vdr[1267]: switching to channel 7
Dec 28 20:21:56 vdr vdr[1290]: receiver thread started on device 1 
(pid=1290)
Dec 28 20:21:56 vdr vdr[1267]: setting watchdog timer to 30 seconds
Dec 28 20:22:02 vdr vdr[1267]: assuming manual start of VDR
Dec 28 20:22:02 vdr vdr[1267]: max. latency time 1 seconds
Dec 28 20:22:27 vdr vdr[1290]: ERROR: video data stream broken on device
1
Dec 28 20:22:27 vdr vdr[1290]: initiating emergency exit
Dec 28 20:22:27 vdr vdr[1267]: emergency exit requested - shutting down
Dec 28 20:22:27 vdr vdr[1289]: KBD remote control thread ended
(pid=1289)
Dec 28 20:22:27 vdr vdr[1267]: saved setup to 
/usr/local/src/VDRtmp/setup.conf
Dec 28 20:22:27 vdr vdr[1271]: EIT processing thread ended (pid=1271) - 
master
Dec 28 20:22:27 vdr vdr[1272]: tuner thread ended on device 1 (pid=1272)
Dec 28 20:22:27 vdr vdr[1290]: receiver thread ended on device 1
(pid=1290)
Dec 28 20:22:27 vdr vdr[1275]: EIT processing thread ended (pid=1275)
Dec 28 20:22:27 vdr vdr[1277]: tuner thread ended on device 2 (pid=1277)
Dec 28 20:22:27 vdr vdr[1280]: EIT processing thread ended (pid=1280)
Dec 28 20:22:27 vdr vdr[1282]: tuner thread ended on device 3 (pid=1282)
Dec 28 20:22:27 vdr vdr[1285]: EIT processing thread ended (pid=1285)
Dec 28 20:22:28 vdr vdr[1286]: tuner thread ended on device 4 (pid=1286)
Dec 28 20:22:28 vdr vdr[1267]: stopping plugin: prefermenu
Dec 28 20:22:28 vdr vdr[1267]: stopping plugin: teletext
Dec 28 20:22:28 vdr vdr[1267]: stopping plugin: vdrmail
Dec 28 20:22:28 vdr vdr[1267]: stopping plugin: lcdproc
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: tetris
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: stream
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: vdrcd
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: vdrc
Dec 28 20:22:29 vdr vdr[1267]: saved setup to 
/usr/local/src/VDRtmp/setup.conf
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: tvtv
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: vcd
Dec 28 20:22:29 vdr vdr[1267]: stopping plugin: dvd
Dec 28 20:22:29 vdr vdr[1267]: max. latency time 1 seconds
Dec 28 20:22:29 vdr vdr[1267]: exiting
Dec 28 20:22:29 vdr vdr[1267]: emergency exit!
Dec 28 20:22:29 vdr su: pam_unix2: session finished for user root,
service 
su 
Dec 28 20:22:40 vdr kernel: Linux video capture interface: v1.00
<import>

The line "vdr[1290]: ERROR: video data stream broken on device 1"
appears, 
'cause the TT-DVB-S card has no connection to the antenna. Isn't it so? 

Is it possible to run VDR without the connection to the antenna?

Every hint is welcome!

Pfiadseich,
           BC
-- 
Michael Nausch                Anzinger Str. 20                 85586
Poing
+49-8121-971940 (voice)                              +49-8121-971941
(fax)
http://omni128.de
michael@nausch.org



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr"
as subject.



--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.