Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: vdr and kernel 2.6, problem
Dipl. Ing. Werner Punz wrote:
ok that was it as soon as I loaded the ves1x93 driver VDR no longer
terminates,
thanks for all your help, I will put this into a document the next few
days so that it can be
put onto the VDR website :-)
mhh one step further, next problem, ok the drivers switch something on
in my card, passthrough of the sat signal works, and the connection
xawtv/vdr also works I can playback files in my video dir and see
something, but the problem is that I don´t get anything from
the sat card itself, is it possible that the format how the channel
frequencies are handled has changed in the last few VDR revisions (my
personal guess is that my old channel list simply does not make it
anymore: here is an example of the list I use:
:( Hauptprogramme )
ARD:11837:H:S19.2E:27500:101:102:104:0:28106:0:0:0
ZDF:11954:H:S19.2E:27500:110:120:130:0:28006:0:0:0
RTL:12188:H:S19.2E:27500:163:104:105:0:12003:0:0:0
SAT 1:12480:V:S19.2E:27500:1791:1792:34:0:46:0:0:0
Pro 7:12480:V:S19.2E:27500:255:256;257:32:0:898:0:0:0
RTL2:12188:H:S19.2E:27500:166:128:68:0:12020:0:0:0
Kabel 1:12480:V:S19.2E:27500:511:512:33:0:899:0:0:0
VOX:12188:H:S19.2E:27500:167:136:71:0:12060:0:0:0
SuperRTL:12188:H:S19.2E:27500:165:120:65:0:12040:0:0:0
:(Spartensender)
as I said there is a definitive switch there....
does anyone have a clue (I´m on a diseq here, but my other
sat receiver which gets the pass through signal definitely gets the
signal for the same
channel, so I am definitely on the corrent LNB)
I´m not sure, since I know that the card usually needs a separate
firmware which is loaded during initialization, how this is handled for
the 2.6 drivers, all I know in 2.4 the firmware was bundled with the
drivers.
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index