[vdr] Re: Avermedia 771 Requirements

[Lauri Tischler <lwgt@iki.fi>]

Thomas Müller wrote:
> Lauri Tischler wrote:
>
> > Joerg Bingemer wrote:
> >
> > > Hi,
> > >
> > > I own a VDR with DVB-S (Nexus) and want to add a AverMedia AverTV 
> > > DVB-T 771 or a Technisat Airstar 2 as second device to my systems. I 
> > > use ctVDR which should includes drivers for both with the 
> > > "2.4.26-ctvdrskas-1" Kernel.
> > >
> > > My problem is, I'm not sure if my System meets the requirements. The 
> > > second card is only for recording, so the requirements on the 
> > > datasheet are not right (thats what I think).
> > >
> > > Are there any ideas on this ?
> > > Joerg
> > >
> > > PS: Here is my System.......
> > >
> > > Intel P3-450MHz
> > > Gigabyte Board with BX Chipset
> > > 256 MB Ram
> > > System HD:   10GB
> > > Video HD's:   3 * 40GB + 1 * 120GB
> > So, what's the problem. I run Nexus-S and Nova-T on
> > Celeron 433 without any problem
> > Right now recording terrestrial channel to /video0
> > over nfs with CPU idle appr. 80%
> which nova-t  (phillips or connexant) do u have in your setup?
>
> If you'll got the connexant chipset working you could send me some info
Ummmm, I dont know and I'm not at home either but..

These modules are loaded...
grundig_29504-491       3588   1
grundig_29504-401       4268   1

lspci -vv says...
0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / Hauppauge WinTV-NOVA-T DVB card
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e0800000 (32-bit, non-prefetchable) [size=512]

0000:01:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Siemens/Technotrend/Hauppauge DVB card rev1.3
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 4
        Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512]