[linux-dvb] Using AverTV DVB-T 771 remotes?

[Olaf Bauer]

> > > I was directed here regarding using the remote control for my AverTV
> > > DVB-T 771.
> >
> > I had that remote control running some time ago by adding a lot of
> > parameters to modprobe. I found it on the lirc-list:
> >
> > http://sourceforge.net/mailarchive/message.php?msg_id=7719048
>
> Ah, excellent - could you please supply your lircd.conf? That archive
> doesn't seem to retain attachments :(

If lirc_gpio loaded successfully, you can use irrecord to create a 
configuration file. I attached my lircd.conf anyway.

Olaf

-------------- next part --------------

# Please make this file available to others
# by sending it to <lirc at bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.7.1-CVS(avermedia) on Tue Jan 11 20:55:36 2005
#
# contributed by 
#
# brand:                       test.conf
# model no. of remote control: 
# devices being controlled by this remote:
#

begin remote

  name  AVerTV_DVB-T_771
  bits            8
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  gap          199892
  toggle_bit      0


      begin codes
          1                        0x75
          2                        0xB5
          3                        0x35
          4                        0x6D
          5                        0xAD
          6                        0x2D
          7                        0x65
          8                        0xA5
          9                        0x25
          0                        0x5D
          source                   0x7D
          teletext                 0xBD
          power                    0xFD
          audio                    0xED
          fullscreen               0xE5
          preview                  0xDD
          display                  0x9D
          loop                     0x1D
          backward                 0x55
          forward                  0x95
          capture                  0x15
          mute                     0xD5
          record                   0x4D
          pause                    0x8D
          stop                     0x0D
          play                     0xCD
          ok                       0xC5
          cancel                   0xF9
          volume+                  0x05
          volume-                  0x85
          next                     0x39
          previous                 0xB9
          red                      0x45
          green                    0x79
          yellow                   0xC5
          blue                     0xF9
          enter                    0x5D
      end codes

end remote