[linux-dvb] Re: pluto2 and affected line

[Michal Semler]

Hi Andreas,

I got fresh CVS without pluto_fe, compiled, updated firmware and plugged it to 
hotplug's location, but no success:

notas:/home/cijoml# lsmod
Module                  Size  Used by
tda1004x               14212  0
pluto2                  6656  0
dvb_core               74920  1 pluto2
i2c_algo_bit            8584  1 pluto2
firmware_class          7680  1 pluto2
pluto_fe               56964  1 pluto2
i2c_core               18064  4 tda1004x,pluto2,i2c_algo_bit,pluto_fe
hci_usb                12808  8
rfcomm                 34204  6
hidp                   12160  4
l2cap                  22916  18 rfcomm,hidp
bluetooth              43012  16 hci_usb,rfcomm,hidp,l2cap
hostap_cs              53144  1
hostap                105096  1 hostap_cs
nsc_ircc               15036  0
irda                  119224  3 nsc_ircc
crc_ccitt               1920  1 irda
ide_cd                 36356  0
cdrom                  37280  1 ide_cd
parport_pc             31812  0
parport                31816  1 parport_pc
8139too                20864  0
mii                     4224  1 8139too
snd_intel8x0m          15044  3
8250_pci               17024  0
8250                   21700  1 8250_pci
serial_core            19200  1 8250
snd_intel8x0           28864  1
snd_ac97_codec         72824  2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss            48800  0
snd_mixer_oss          17664  1 snd_pcm_oss
snd_pcm                81928  6 
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              21508  1 snd_pcm
snd                    46692  13 
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc          7556  3 snd_intel8x0m,snd_intel8x0,snd_pcm
ehci_hcd               31496  0
usbhid                 33280  0
uhci_hcd               28816  0
nls_iso8859_2           4480  1
ntfs                  175504  1
rtc                    10552  0

dmesg:

PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.0 to 64
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
DVB: registering new adapter (pluto2).
pluto2 0000:03:00.0: board revision 15.255
pluto2 0000:03:00.0: MAC ff:ff:ff:ff:ff:ff
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2: could not attach frontend
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)
pluto2 0000:03:00.0: overflow irq (1)


Michal

Dne po 25. dubna 2005 23:56 jste napsal(a):
> Hi Michal,
>
> On Mon, 2005-04-25 at 23:07 +0200, Michal Semler wrote:
> > I tried move it earlyer, but without success:
>
> please try a cvs update. Note that pluto_fe is not used anymore, use
> tda1004x instead. You'll need to put the demod firmware
> to /usr/lib/hotplug/firmware. A script to download and extract the
> firmware can be found at linux/Documentation/dvb/get_dvb_firmware.
> There's also a copy of the firmware in cvs at
> dvb-kernel/firmware/dvb-fe-tda10046.fw.
>
> Regards,
> Andreas

-- 
S pozdravem

Michal Semler