[linux-dvb] AVerTV-771 not working anymore

Ronny Peine RonnyPeine at gmx.de
Tue Aug 9 18:53:16 CEST 2005


Hi,

i have a quite annoying problem.
Sometimes my dvb-t card works quite well after a boot,
but mostly it errors out with:

mt352_read_register: readreg error (reg=127, ret==-5)
dvb-bt8xx: A frontend driver was not found for device 109e/0878 
subsystem 1461/0771

As you can see i have an avertv dvb-t 771 (i worked on the mt352 driver, 
thanks for wolgang jost for his good work).

My kernel is 2.6.12-gentoo-r6. I think the problem maybe has something 
to do with my mainboard or its bios. I testet some older bios versions 
and the latest one, but the problem doesn't go away. Even 
kernelparameters like noapic, acpi=off and 
pci=bios/nobios,usepirqmask,noacpi don't improve the situation.

All modules are working properly except of mt352, as you can see here:

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, 
low) -> IRQ 17
bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 17, latency: 32, mmio: 
0xe9000000
bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID 
is 1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f0ff0f [init]
bttv0: using tuner=4
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC2] -> GSI 17 (level, 
low) -> IRQ 17
bt878(0): Bt878 (rev 17) at 02:09.1, irq: 17, latency: 32, memory: 
0xe9001000
DVB: registering new adapter (bttv0).

Does anybody have an idea, how to get this working again?

Thanks for any coming answer.




More information about the linux-dvb mailing list