[linux-dvb] problems with nexus-ca

Sebastian Reitenbach buzzdee at web.de
Wed Aug 17 07:01:01 CEST 2005


Hi,

just wanted to enter the dvb arena and bought a hauppauge nexus-ca card.
loading the driver seems to work as the debug output shows:

Aug 14 19:26:05 linux kernel: saa7146: register extension 'dvb'.
Aug 14 19:26:05 linux kernel: ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 17 (level,
 low) -> IRQ 185
Aug 14 19:26:05 linux kernel: saa7146: found saa7146 @ mem f8e96c00 (revision 1, ir
q 185) (0x13c2,0x000a).
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_attach(): dev: f08a9d80
Aug 14 19:26:05 linux udevd[2471]: move seq 1424 with timeout 10 to exec queue
Aug 14 19:26:05 linux kernel: DVB: registering new adapter (Technotrend/Hauppauge W
inTV Nexus-CA rev1.X).
Aug 14 19:26:05 linux kernel: adapter has MAC addr = 00:d0:5c:25:a1:42
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): debi test OK
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load boot code
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load dram code
Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 0
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 1
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 2
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
[lots of these lines]
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: load_dram(): writing DRAM block 75
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: waitdebi(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_bootarm(): load dpram code
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_firmversion(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_fw_request(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq 0x0000 0
Aug 14 19:26:05 linux kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Aug 14 19:26:05 linux kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b025001
8, vid 71010068, app 8000261f
Aug 14 19:26:05 linux kernel: dvb-ttpci: firmware @ card 0 supports CI link layer i
nterface
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_set_volume(): av7110:de170000,
Aug 14 19:26:05 linux kernel: dvb-ttpci: arm_thread(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: adac type set to 0 @ card 0
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_set_volume(): av7110:de170000,
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_setup_irc_config(): de170000
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_register(): de170000
Aug 14 19:26:05 linux kernel: saa7146_vv: saa7146 (0): registered device video0 [v4
l2]
Aug 14 19:26:05 linux kernel: DVB: registering frontend 0 (ST STV0297 DVB-C)...
Aug 14 19:26:05 linux kernel: input.c: calling hotplug without a hotplug agent defi
ned
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_setup_irc_config(): 00000000
Aug 14 19:26:05 linux kernel: dvb-ttpci: av7110_register_irc_handler(): registering
 f923ddb0
Aug 14 19:26:05 linux kernel: dvb-ttpci: found av7110-0.
Aug 14 19:26:10 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq 0x000d 0
Aug 14 19:26:10 linux kernel: dvb-ttpci: gpioirq(): GPIO0 irq: DATA_MPEG_VIDEO_EVEN
T: w/h/ar = 0/0/0
Aug 14 19:26:12 linux hald[6325]: Timed out waiting for hotplug event 1408. Rebasin
g to 1410



but when I try to scan for the channels i get the following messages:
Aug 14 19:29:20 linux kernel: nexusca: pll transfer failed!
Aug 14 19:29:20 linux kernel: stv0297_writereg: writereg error (reg == 0x82, val ==
 0x00, ret == -5)
Aug 14 19:29:20 linux kernel: stv0297_readreg: readreg error (reg == 0x25, ret == -
5)
Aug 14 19:29:20 linux kernel: stv0297_writereg: writereg error (reg == 0x25, val ==
 0xff, ret == -5)
Aug 14 19:29:21 linux kernel: stv0297_writereg: writereg error (reg == 0x21, val ==
 0x40, ret == -5)
Aug 14 19:29:21 linux kernel: stv0297_writereg: writereg error (reg == 0x20, val ==
 0x5d, ret == -5)
Aug 14 19:29:22 linux kernel: nexusca: pll transfer failed!
Aug 14 19:29:22 linux kernel: stv0297_writereg: writereg error (reg == 0x82, val ==
 0x00, ret == -5)
Aug 14 19:29:22 linux kernel: stv0297_readreg: readreg error (reg == 0x25, ret == -
5)
Aug 14 19:29:22 linux kernel: stv0297_writereg: writereg error (reg == 0x25, val ==
 0xff, ret == -5)
Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x21, val ==
 0x40, ret == -5)
Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x20, val ==
 0x5d, ret == -5)
Aug 14 19:29:23 linux kernel: stv0297_readreg: readreg error (reg == 0x43, ret == -
5)
Aug 14 19:29:23 linux kernel: stv0297_writereg: writereg error (reg == 0x43, val ==
 0xef, ret == -5)
...


did I missed something? I tested with vanilla kernel 2.6.12.4 on a suse 9.3 box. any hint what I can do?

kind regards
sebastian
_________________________________________________________________________
Mit der Gruppen-SMS von WEB.DE FreeMail können Sie eine SMS an alle 
Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179







More information about the linux-dvb mailing list