[Fwd: Re: [linux-dvb] - DEC3000s -- dvbscan fails - build channel list with kaffeine fails -]

Peter Beutner p.beutner at gmx.net
Mon Aug 22 18:08:19 CEST 2005


Johann schrieb:
> Here is some console output using some programs:
> jdu2 ~ # /root/dvb-apps/util/szap/szap Euronews
> reading channels from file '/root/.szap/channels.conf'
> zapping to 983 'EuroNews':
> sat 0, frequency = 12597 MHz V, symbolrate 27500000, vpid = 0x08ad, apid 
> = 0x08b7 sid = 0x0300
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> FE_DISEQC_SEND_BURST failed: Operation not supported
> status 1f | signal fffe | snr fffe | ber fffffffe | unc fffffffe | 
> FE_HAS_LOCK
[...]
> jdu2 ~ # mplayer /dev/dvb/adapter0/dvr0
[...]
> Cache fill:  0.00% (0 bytes)
you need to pass -r to szap to get data from /dev/dvb/adapterX/dvr0
e.g.: root/dvb-apps/util/szap/szap -r Euronews
and then in another terminal: mplayer /dev/dvb/adapter0/dvr0
Im not sure how critical/uncritical the not implemented DISEQC_BURST cmd 
is, as I have almost no idea about that sat/diseqc stuff ..?

> No programs seems to work (unless szap that is reported to be OK if 
> FE_HAS_LOCK).
and even that is misleading as the driver always reports FE_HAS_LOCK 
even if that isnt true.
You can try the patch I posted here [1], with which you actually only 
get a FE_HAS_LOCK if the box has tuned successfully to a channel.
(hm although I dont know for sure if this works the same on your 
dec3000s as on the dec2000t :/)

Cu
  Peter

[1] http://www.linuxtv.org/pipermail/linux-dvb/2005-July/003237.html

> By the way, I've removed for tests the CAM module and TPS smartcard.
> 
> Any hints?
> 
> Thanks again.
> Johann
> 




More information about the linux-dvb mailing list