[linux-dvb] Pinnacle PCTV SAT bttv

Edgar Toernig froese at gmx.de
Tue Aug 30 05:49:13 CEST 2005


Ferdinando Romano wrote:
>
> I execute :
> # modprobe bttv i2c_hw=1 card=0x5E
> # modprobe dvb-bt8xx
> # modprobe cx24110
> -----------
> 
> and dmesg show me
> 
> ------------
> Linux video capture interface: v1.00
> [drm] Loading R200 Microcode
> v4l2_common: unsupported module, tainting kernel.
> video_buf: unsupported module, tainting kernel.

Uhh?  That shouldn't be there...

> bttv: driver version 0.9.15 loaded
>[...]
> bttv0: PLL: 28636363 => 35468950 .. ok
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 19 (level, low) -> IRQ 177
> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 177, latency: 64, memory: 0xf7d00000
> ----------------

Something's missing here.  The dvb-driver isn't loaded.  Only
the "analog" part for the video-in connector.  That part
gives you /dev/video0 (for video grabbing) and /dev/vbi (for
teletext).

Usually, it continues with:

| DVB: registering new adapter (bttv0).
| DVB: registering frontend 0 (Conexant CX24110 ...

and between the "PLL: 28..." and the "AUDIO driver..." line
I miss a "bttv0: add subdevice "dvb0" in the log.

Are you sure that all 3 modprobes are executed without
error?  I got the card working with (iirc) stock SuSE-9.2.

Ciao, ET.




More information about the linux-dvb mailing list