[linux-dvb] Fusion 3 Gold (18ac:d800)

Todd Ignasiak ignasiak at gmail.com
Sat Dec 10 10:19:24 CET 2005


On 12/2/05, Michael Krufky <mkrufky at linuxtv.org> wrote:
>
> Todd Ignasiak wrote:
> > On 11/29/05, CityK <CityK at rogers.com> wrote:
> >
> >>Michael Krufky wrote:
> >>
> >>>CityK wrote:
> >>>
> >>>
> >>>>A few months ago Taylor posted that he had put together a patch for
> >>>>the original Fusion 3 Gold (18ac:d800) :
> >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005008.html
> >>>>
> >>>>I didn't see any or perhaps missed the follow up this card, but I'm
> >>>>mildly curious if:
> >>>>a) Taylor got it working (and is anyone is using the board)?
> >>>>   and
> >>>>b) whether or not the it is working with digital cable? ... (although
> >>>>its prospects are poor, as discussed in both
> >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005034.html
> >>>>and
> >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005035.html)
> >>>
> >>>Taylor never showed us a patch... I always wondered why.
> >>>
> >>>Anyhow, based on the DViCO Windows driver INF file, the following
> >>>patch should be all that's necessary, unless the board has different
> >>>GPIO programming.
> >>>
> >>>I don't want to apply this unless someone can test it and confirm that
> >>>it works.  It is very likely that a new card entry will be needed for
> >>>alternate GPIO settings, although the DViCO cards are known to work
> >>>with the wrong GPIO settings.  :-/
> >>>
> >>>
>
> >>>------------------------------------------------------------------------
> >>>
> >>> linux/drivers/media/video/cx88/cx88-cards.c |    4 ++++
> >>> 1 file changed, 4 insertions(+)
> >>>
> >>>--- v4l-dvb.orig/linux/drivers/media/video/cx88/cx88-cards.c  2005-11-25
> 05:24:13.000000000 -0500
> >>>+++ v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c
> 2005-11-29 01:06:57.000000000 -0500
> >>>@@ -1015,6 +1015,10 @@
> >>>              .card      = CX88_BOARD_KWORLD_DVB_T,
> >>>      },{
> >>>              .subvendor = 0x18ac,
> >>>+             .subdevice = 0xd800,
> >>>+             .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
> >>>+     },{
> >>>+             .subvendor = 0x18ac,
> >>>              .subdevice = 0xd810,
> >>>              .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
> >>>      },{
> >>>
> >>
> >>
> >>Michael Krufky wrote:
> >>
> >>>CityK wrote:
> >>>
> >>>>Cool.  As you already know, I  picked this last part of the
> >>>>discussion up on the DVB list.  Perhaps Taylor or someone else will
> >>>>let us know.
> >>>
> >>>Yes...  I also have information about FusionHDTV II ...  If anybody
> >>>out there has one, please let me know, and I'll send you a patch to
> test.
> >
> >
> > I have an older Fusion card.  I'm not sure if it's a Fusion II or III,
> >  but it's pre-QAM.    I'll dig it out of the storage box & check it
> > out.
> >
> > If someone has a patch, or needs other info on the card, let me know.
>
> When you determine exactly which card it is, let me know and provide the
> pci id... i have some nice docs from dvico with almost all the info that
> i need, provided that it uses frontend demod's and tuner already
> supported.
>
> Glue code is easy.
>
> -Mike
>

I finally located that card.    It's labeled "FusionHDTV II"
It has a Conexant Fusion 878A / 25878-13 chip,  and an Oren OR51211AHQC.
I can't tell what type of tuner is on the board.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051210/bc147d3c/attachment.htm


More information about the linux-dvb mailing list