[linux-dvb] Twinhan Cab-CI 2031

Svein Olav Bjerkeset svein.olav at bjerkeset.com
Tue Dec 13 15:58:08 CET 2005


Hi,

Check this link from the mailing list archive:

http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004866.html

Svein Olav Bjerkeset

> Hi,
>
> I have a Twinhan Cab-CI card and I've been trying to get it to work in
> my Debian machine, I want to use it as a MythTV backend eventually. The
> card is a model 20310(says so on the box). At first I tried it with the
> drivers that came with 2.6.14.1, but all I got  from scan was ">>>
> tuning status == 0x00". So I tried the more-or-less latest CVS and a
> snapshot, but the only difference was that the scanning got faster(it
> was very slow at first). Right now I compiled a 2.6.14.3 kernel without
> any DVB drivers(only the dvb-core) included and installed the CVS
> versions, again only >>> tuning status == 0x00.
>
> So I'm wondering, does this card work at all? I understand that there
> are different versions? Also, all my channels are encrypted with Conax,
> but I do have a CAM and it works in my win machine. Nevertheless, I was
> under the impression, that I should still be able to detect the
> channels, just not watch them, if the CAM part doesn't work?
>
> It's very likely I'm just doing something wrong or missing a step...
>
> Raido
>
> part of dmesg:
>
> Linux video capture interface: v1.00
> bttv: driver version 0.9.16 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
> ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level,
> low) -> IRQ 17
> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio:
> 0xfaafe000
> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
> 1822:0001
> bttv0: using: Twinhan DST + clones [card=113,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init]
> bttv0: using tuner=4
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level,
> low) -> IRQ 17
> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory:
> 0xfaaff000
> DVB: registering new adapter (bttv0).
> dst_get_device_id: Recognise [DCT-CI]
>
> DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10
> firmware version = 2
> dst_get_mac: MAC Address=[00:08:ca:16:15:00]
> dst_ca_attach: registering DST-CA device
> DVB: registering frontend 0 (DST DVB-C)...
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>





More information about the linux-dvb mailing list