[linux-dvb] Twinhan Cab-CI 2031

Raido raidoz at hot.ee
Wed Dec 14 12:15:50 CET 2005


I just realized that I have an AMD64 system and I forgot to mention 
that... shoot me.

Raido wrote:

> After some searching I actualy figured out where the change had to be 
> made, but still no luck. Now from dmesg:
>    dst_get_device_id: Recognise [DCT-CI]
>    DST type flags : 0x1 newtuner 0x10 firmware version = 2
>
> Unfortunately scan still gives me:
>    scan -v est > channels.conf
>    scanning est
>    using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>    initial transponder 322000000 6875000 0 5
>    >>> tune to: 322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_256
>    >>> tuning status == 0x00
>    ...
>    >>> tuning status == 0x00
>    WARNING: >>> tuning failed!!!
>    >>> tune to: 322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_256 
> (tuning failed)
>    >>> tuning status == 0x00
>    ...
>    >>> tuning status == 0x00
>    WARNING: >>> tuning failed!!!
>    ERROR: initial tuning failed
>    dumping lists (0 services)
>    Done.
>
> Perhaps someone could send me a working version of drivers?
>
>
>
> Per Dalén wrote:
>
>> Hi,
>>
>> I have the same card as You and I had also problems with 
>> tuning/scaning berfore I changed the dst_tlist[] to be
>> ".type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2" as Manu 
>> suggested.
>> I have not tested the new combined v4l/dvb cvs yet (hope that I will 
>> find som time for that during the weekend).
>> So try to change and see if it makes any difference.
>>
>> regards
>> Per Dalén
>>
>> Raido wrote:
>>
>>>  >From what I can tell, they already have a channels.conf, but I am 
>>> unable to create one.
>>>
>>> Svein Olav Bjerkeset wrote:
>>>
>>>> Hi,
>>>>
>>>> Check this link from the mailing list archive:
>>>>
>>>> http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004866.html
>>>>
>>>> Svein Olav Bjerkeset
>>>>
>>>>  
>>>>
>>>>> Hi,
>>>>>
>>>>> I have a Twinhan Cab-CI card and I've been trying to get it to 
>>>>> work in
>>>>> my Debian machine, I want to use it as a MythTV backend 
>>>>> eventually. The
>>>>> card is a model 20310(says so on the box). At first I tried it 
>>>>> with the
>>>>> drivers that came with 2.6.14.1, but all I got  from scan was ">>>
>>>>> tuning status == 0x00". So I tried the more-or-less latest CVS and a
>>>>> snapshot, but the only difference was that the scanning got faster(it
>>>>> was very slow at first). Right now I compiled a 2.6.14.3 kernel 
>>>>> without
>>>>> any DVB drivers(only the dvb-core) included and installed the CVS
>>>>> versions, again only >>> tuning status == 0x00.
>>>>>
>>>>> So I'm wondering, does this card work at all? I understand that there
>>>>> are different versions? Also, all my channels are encrypted with 
>>>>> Conax,
>>>>> but I do have a CAM and it works in my win machine. Nevertheless, 
>>>>> I was
>>>>> under the impression, that I should still be able to detect the
>>>>> channels, just not watch them, if the CAM part doesn't work?
>>>>>
>>>>> It's very likely I'm just doing something wrong or missing a step...
>>>>>
>>>>> Raido
>>>>>
>>>>> part of dmesg:
>>>>>
>>>>> Linux video capture interface: v1.00
>>>>> bttv: driver version 0.9.16 loaded
>>>>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>>>>> bttv: Bt8xx card found (0).
>>>>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>>>>> ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 19 (level,
>>>>> low) -> IRQ 17
>>>>> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 17, latency: 64, mmio:
>>>>> 0xfaafe000
>>>>> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem 
>>>>> ID is
>>>>> 1822:0001
>>>>> bttv0: using: Twinhan DST + clones [card=113,autodetected]
>>>>> bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init]
>>>>> bttv0: using tuner=4
>>>>> bttv0: add subdevice "dvb0"
>>>>> bt878: AUDIO driver version 0.0.0 loaded
>>>>> bt878: Bt878 AUDIO function found (0).
>>>>> ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNKB] -> GSI 19 (level,
>>>>> low) -> IRQ 17
>>>>> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 17, latency: 64, memory:
>>>>> 0xfaaff000
>>>>> DVB: registering new adapter (bttv0).
>>>>> dst_get_device_id: Recognise [DCT-CI]
>>>>>
>>>>> DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10
>>>>> firmware version = 2
>>>>> dst_get_mac: MAC Address=[00:08:ca:16:15:00]
>>>>> dst_ca_attach: registering DST-CA device
>>>>> DVB: registering frontend 0 (DST DVB-C)...
>>>>>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>




More information about the linux-dvb mailing list