[linux-dvb] Pinnacle 300i (saa7134-dvb, mt352) not supportet anymore?

tim0m1a tim0m1a at gmx.de
Thu Dec 29 11:48:21 CET 2005


Hi list,

it is me again.

I could not manage to get my pinnacle running with the 2.6.14 kernel until  
now.

Does anybody use the pinnacle 300i with a kernel-version later than 2.6.12?
For me the card works fine with the 2.6.12 kernel but I get plenty of I2C  
errors if I use any newer kernel.

This is my /var/log/messages output:

[BEGIN /var/log/messages]
[...]
Dec 29 11:39:41  [ 1835.998374] Linux video capture interface: v1.00
Dec 29 11:39:41  [ 1836.040520] saa7130/34: v4l2 driver version 0.2.14  
loaded
Dec 29 11:39:41  [ 1836.041521] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI  
18 (level, low) -> IRQ 17
Dec 29 11:39:41  [ 1836.041642] saa7134[0]: found at 0000:00:0a.0, rev: 1,  
irq: 17, latency: 32, mmio: 0xcfffcc00
Dec 29 11:39:41  [ 1836.041704] saa7134[0]: subsystem: 11bd:002d, board:  
Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
Dec 29 11:39:41  [ 1836.041770] saa7134[0]: board init: gpio is c806000
Dec 29 11:39:41  [ 1836.146101] i2c_adapter i2c-0: adapter [saa7134[0]]  
registered
Dec 29 11:39:41  [ 1836.146269] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x50, len=1
Dec 29 11:39:41  [ 1836.153201] i2c_adapter i2c-0: master_xfer[0] R,  
addr=0x50, len=64
Dec 29 11:39:41  [ 1836.168878] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8  
f8 1c 00 43 43 a9 1c 55 d2 b2 92
Dec 29 11:39:41  [ 1836.169077] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff  
20 ff ff ff ff ff ff ff ff ff ff
Dec 29 11:39:41  [ 1836.169264] saa7134[0]: i2c eeprom 20: 01 40 01 02 03  
ff 03 01 08 ff 00 25 ff ff ff ff
Dec 29 11:39:41  [ 1836.169448] saa7134[0]: i2c eeprom 30: ff ff ff ff ff  
ff ff ff ff ff ff ff ff ff ff ff
Dec 29 11:39:41  [ 1836.175206] i2c-core: driver [tuner] registered
Dec 29 11:39:41  [ 1836.175215] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x4b
Dec 29 11:39:41  [ 1836.175221] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x4b, len=0
Dec 29 11:39:41  [ 1836.175357] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x60
Dec 29 11:39:41  [ 1836.175360] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x60, len=0
Dec 29 11:39:41  [ 1836.184868] tuner 0-0060: chip found @ 0xc0  
(saa7134[0])
Dec 29 11:39:41  [ 1836.184875] i2c_adapter i2c-0: master_xfer[0] R,  
addr=0x60, len=7
Dec 29 11:39:41  [ 1836.192850] tuner 0-0060: Chip ID is not zero. It is  
not a TEA5767
Dec 29 11:39:41  [ 1836.192857] i2c_adapter i2c-0: client [(tuner unset)]  
registered with bus id 0-0060
Dec 29 11:39:41  [ 1836.193862] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x60, len=1
Dec 29 11:39:41  [ 1836.200846] i2c_adapter i2c-0: master_xfer[0] R,  
addr=0x60, len=21
Dec 29 11:39:41  [ 1836.212827] tuner 0-0060: microtune: companycode=3cbf  
part=42 rev=2f
Dec 29 11:39:41  [ 1836.212831] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x60, len=2
Dec 29 11:39:41  [ 1836.220817] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x60, len=2
Dec 29 11:39:41  [ 1836.228808] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x60, len=1
Dec 29 11:39:41  [ 1836.236800] i2c_adapter i2c-0: master_xfer[0] R,  
addr=0x60, len=1
Dec 29 11:39:41  [ 1836.244791] tuner 0-0060: microtune MT2050 found, OK
Dec 29 11:39:41  [ 1836.244797] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x61
Dec 29 11:39:41  [ 1836.244802] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x61, len=0
Dec 29 11:39:41  [ 1836.244937] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x62
Dec 29 11:39:41  [ 1836.244940] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x62, len=0
Dec 29 11:39:41  [ 1836.245110] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x63
Dec 29 11:39:41  [ 1836.245113] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x63, len=0
Dec 29 11:39:41  [ 1836.245283] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x64
Dec 29 11:39:41  [ 1836.245285] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x64, len=0
Dec 29 11:39:41  [ 1836.245453] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x65
Dec 29 11:39:41  [ 1836.245456] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x65, len=0
Dec 29 11:39:41  [ 1836.245624] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x66
Dec 29 11:39:41  [ 1836.245627] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x66, len=0
Dec 29 11:39:41  [ 1836.245795] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x67
Dec 29 11:39:41  [ 1836.245798] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x67, len=0
Dec 29 11:39:41  [ 1836.245966] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x68
Dec 29 11:39:41  [ 1836.245969] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x68, len=0
Dec 29 11:39:41  [ 1836.246136] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x69
Dec 29 11:39:41  [ 1836.246139] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x69, len=0
Dec 29 11:39:41  [ 1836.246307] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6a
Dec 29 11:39:41  [ 1836.246310] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6a, len=0
Dec 29 11:39:41  [ 1836.246478] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6b
Dec 29 11:39:41  [ 1836.246481] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6b, len=0
Dec 29 11:39:41  [ 1836.246649] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6c
Dec 29 11:39:41  [ 1836.246652] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6c, len=0
Dec 29 11:39:41  [ 1836.246829] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6d
Dec 29 11:39:41  [ 1836.246832] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6d, len=0
Dec 29 11:39:41  [ 1836.247000] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6e
Dec 29 11:39:41  [ 1836.247003] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6e, len=0
Dec 29 11:39:41  [ 1836.247171] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x6f
Dec 29 11:39:41  [ 1836.247174] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x6f, len=0
Dec 29 11:39:41  [ 1836.253402] i2c-core: driver [i2c tda9887 driver]  
registered
Dec 29 11:39:41  [ 1836.253411] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x42
Dec 29 11:39:41  [ 1836.253417] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x42, len=0
Dec 29 11:39:41  [ 1836.253588] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x43
Dec 29 11:39:41  [ 1836.253590] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x43, len=0
Dec 29 11:39:41  [ 1836.260782] tda9885/6/7: chip found @ 0x86
Dec 29 11:39:41  [ 1836.260795] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x43, len=4
Dec 29 11:39:41  [ 1836.268764] i2c_adapter i2c-0: client [tda9887]  
registered with bus id 0-0043
Dec 29 11:39:41  [ 1836.269773] i2c_adapter i2c-0: found normal entry for  
adapter 0, addr 0x4b
Dec 29 11:39:41  [ 1836.269780] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x4b, len=0
Dec 29 11:39:41  [ 1836.272135] saa7134[0]: registered device video0 [v4l2]
Dec 29 11:39:41  [ 1836.273118] saa7134[0]: registered device vbi0
Dec 29 11:39:41  [ 1836.309716] saa7134[0]: pinnacle 300i dvb setup
Dec 29 11:39:41  [ 1836.309895] i2c_adapter i2c-0: master_xfer[0] W,  
addr=0x1e, len=1
Dec 29 11:39:41  [ 1836.309949] i2c_adapter i2c-0: master_xfer[1] R,  
addr=0x1e, len=1
Dec 29 11:39:41  [ 1836.320823] DVB: registering new adapter (saa7134[0]).
Dec 29 11:39:41  [ 1836.320962] DVB: registering frontend 0 (Zarlink MT352  
DVB-T)...
[...]
[END /var/log/messages]

If I try to tune any channel tzap shows an acceptable signal value but  
could not lock any channel and I get more I2C errors.

Thanks,

Tim



More information about the linux-dvb mailing list