[linux-dvb] twinhan dvb-t dtt-ci question

Gunther Mayer gunther.mayer at gmx.net
Tue Feb 15 04:26:34 CET 2005


Hi,
can you send me a picture and info for inclusion to
http://www.bttv-gallery.de ?

- picture of the card, the card backside
- picture of remote control (if applicable) and of original package
- list of chips
- list of input connectors
- printings on PCB, printings on stickers on the card
- lspci -v  and   lspci -vn
- "dmesg" when loading the modules
- if feasible "eeprom" output (from bttv tools)
- if feasible "*.INF" files from the Windows Driver CD
- exact tuner type (eventually this is hidden under the vender sticker)
- exact model name and model number from package
- in which country do you live/ in which country this card was bought

Even parts of this info will be very helpful!

Regards, Gunther



Hans Gunnarsson wrote:

>I have a Twinhan dvb-t card with the ci addon card, and with Manu's patch applied to cvs from 2004-12-16, I get this result from dvbscan:
>
>./dvbscan dvb-t/se-Stockholm_Nacka
>scanning dvb-t/se-Stockholm_Nacka
>using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>initial transponder 730000000 0 2 9 3 1 2 0
>initial transponder 754000000 0 2 9 3 1 2 0
>initial transponder 778000000 0 2 9 3 1 2 0
>initial transponder 706000000 0 2 9 3 1 2 0
>initial transponder 746000000 0 2 9 3 1 2 0
>  
>
>>>>tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 730000000:INVERSION_AUTO:BANDWIDTHe_8_MHZe:FEC_2_3:FEC_AUTO>AQAM_6e4:TRANSMISSION_MODE_8KGUARDe_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>  
>
>>>>tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>>>>        
>>>>
>WARNING: >>> tuning failed!!!
>ERROR: initial tuning failed
>dumping lists (0 services)
>Done.
>
>
>
>I have SuSE 9.2 with a 2.6.9 kernel.
>I load the drivers with:
>modprobe bttv i2c_hw=1 card=0x71
>modprobe dvb-bt8xx
>modprobe dst dst_type=1
>modprobe dst_ca
>
>
>Here is the output from dmesg:
>
>bttv: driver version 0.9.15 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 185
>bttv0: Bt878 (rev 17) at 0000:06:02.0, irq: 185, latency: 32, mmio: 0xdfefe000
>bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
>bttv0: using: Twinhan DST + clones [card=113,insmod option]
>bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
>bttv0: using tuner=4
>bttv0: add subdevice "dvb0"
>bt878: AUDIO driver version 0.0.0 loaded
>bt878: Bt878 AUDIO function found (0).
>ACPI: PCI interrupt 0000:06:02.1[A] -> GSI 18 (level, low) -> IRQ 185
>bt878(0): Bt878 (rev 17) at 06:02.1, irq: 185, latency: 32, memory: 0xdfeff000
>DVB: registering new adapter (bttv0).
>dst_check_ci: recognize DTT-CI
>DST type : terrestrial
>DST type flags : 0x2 ts204 0x10 firmware version = 2
>DVB: registering frontend 0 (DST DVB-T)...
>
>
>Any ideas?
>w) -> IRQ 185
>bttv0: Bt878 (rev 17) at 0000:06:02.0, irq: 185, latency: 32, mmio: 0xdfefe000
>bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
>bttv0: using: Twinhan DST + clones [card=113,insmod option]
>bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
>bttv0: using tuner=4
>bttv0: add subdevice "dvb0"
>bt878: AUDIO driver version 0.0.0 loaded
>bt878: Bt878 AUDIO function found (0).
>ACPI: PCI interrupt 0000:06:02.1[A] -> GSI 18 (level, low) -> IRQ 185
>bt878(0): Bt878 (rev 17) at 06:02.1, irq: 185, 
>
>
>_______________________________________________
>linux-dvb mailing list
>linux-dvb at linuxtv.org
>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
>  
>





More information about the linux-dvb mailing list