[linux-dvb] [PATCH] Twinhan...oops

Martin Cap macap20001 at compuserve.de
Wed Feb 23 13:49:05 CET 2005


Manu Abraham wrote:

First, thank you for your attention.

>> bttv0: enabling ETBF (430FX/VP3 compatibilty)
> 
> Which motherboard are you having ?

Uh, it's a lousy FIC KZM-6120 with Intel 440ZX-PCI-Chipset (if that is 
of any interest for you).

> 
> Can you please load the modules with the debug and verbose options ?

Here we go :

bttv0: Bt878 (rev 17) at 0000:00:12.0, irq: 5, latency: 64, mmio: 0xf4102000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID 
is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: risc main @ 0aa26000
bttv0: gpio: en=00000000, out=00000000 in=00f100fe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: Unknown parameter `bt878_debug'
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Enabling device 0000:00:12.1 (0100 -> 0102)
PCI: Found IRQ 5 for device 0000:00:12.1
PCI: Sharing IRQ 5 with 0000:00:12.0
bt878(0): Bt878 (rev 17) at 00:12.1, irq: 5, latency: 64, memory: 0xf4103000
dvb_bt8xx: identified card0 as bttv0
DVB: registering new adapter (bttv0).
DVB: register adapter0/demux0 @ minor: 4 (0x04)
DVB: register adapter0/dvr0 @ minor: 5 (0x05)
DVB: register adapter0/net0 @ minor: 7 (0x07)
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
write_dst writing 00 06 00 00 00 00 00 fa
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst reply is 0xff
dst_wait_dst_ready: dst wait ready after 0
read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to recover from previous errors...
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to recover from previous errors...
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to recover from previous errors...
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to recover from previous errors...
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_error_recovery: Trying to recover from previous errors...
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST..
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_get_device_id: Trying to recover..
dst_get_device_id: Checksum failure!
dst_probe: unknown device.
DVB: register adapter0/ca0 @ minor: 6 (0x06)
DVB: registering frontend 0 (<NULL>)...
DVB: register adapter0/frontend0 @ minor: 3 (0x03)


> Manu
> 
> 
Bye,
Martin Cap




More information about the linux-dvb mailing list