[linux-dvb] [-mm PATCH] v4l: add dvb support for dvico fusionhdtv3 gold-T and fix cx88-dvb for kconfig

[Michael Krufky]

Mac Michaels wrote:

>I do not approve this patch. Mac Michaels
>
>--- linux-2.6.13/drivers/media/video/cx88/cx88-mpeg.c   2005-07-05 00:34:56.000000000 +0000
>+++ linux/drivers/media/video/cx88/cx88-mpeg.c  2005-07-05 00:47:22.000000000 +0000
>@@ -73,11 +73,11 @@
>                cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
>                udelay(100);
>                cx_write(MO_PINMUX_IO, 0x00);
>-               if (core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q) {
>[1]-                       cx_write(TS_HW_SOP_CNTRL,0x47<<16 | 188<<4 | 0x00);
>[2]+               cx_write(TS_HW_SOP_CNTRL,47<<16|188<<4|0x00);
>+               if ((core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q) ||
>+                   (core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T)) {
>                        cx_write(TS_SOP_STAT, 0<<16 | 0<<14 | 1<<13 | 0<<12);
>                } else {
>[3]-                       cx_write(TS_HW_SOP_CNTRL,47<<16|188<<4|0x00);
>                        cx_write(TS_SOP_STAT,0x00);
>                }
>                cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
>
>I added numbers in braces for reference in the following discussion. 
>It appears that Michael thought lines [1] and [3] were identical.
>He simplified the code by combining them in one place at line [2].
>Look carefully at the hexadecimal 0x47 constant in the middle of line [1]
>It the value required for FusionHDTV 3 Gold cards. Lines [2] and [3]
>contain the decimal 47 constant. This part of the patch should not
>be applied.
>
>As an aside, I wonder if all cards should use the 0x47 constant as it is
>listed as the default start byte value for ATSC. It is not actually transmitted
>but is generated by the LGDT3302 chip. I guess other chips could use
>a different value if they want to. That is why I chose not to change the 
>code for cards other than FusionHDTV 3 Gold.
>  
>
Mac-

The change above is already in video4linux cvs.  Please test from cvs to 
confirm that it should be reverted.  I was talking to Mauro about this 
and we were both wondering why you had changed from decimal 47 to Hex 
0x47 , where it seems that decimal 47 should be correct based on all 
other calls...   I have tried both values on my board and noticed no 
difference.  If this actually causes a problem for you, I will revert 
this change.  I am not sending this to Andrew Morton or LKML until this 
is all resolved :-)

Let me know.

-- 
Michael Krufky