[linux-dvb] skystar troubles

admin at timag.org admin at timag.org
Tue Jul 26 11:37:15 CEST 2005


Hello, I have a next problem.
Please, help me, I need help.

I was Install ASP Karelia 10.0 with kernel version 2.6.9-1.667asp.
I have skystar1, for default execute command "lsmod" I see the next:
---------------
dvb_core               86761  0
saa7146                17805  0
...and other's...
--------------
From DMESG I see:

---------------------
saa7146_vv: Unknown symbol videobuf_streamoff
saa7146_vv: Unknown symbol videobuf_poll_stream
saa7146_vv: Unknown symbol videobuf_dma_pci_unmap
saa7146_vv: Unknown symbol videobuf_dma_free
saa7146_vv: Unknown symbol videobuf_reqbufs
saa7146_vv: Unknown symbol v4l_compat_translate_ioctl
saa7146_vv: Unknown symbol videobuf_waiton
saa7146_vv: Unknown symbol videobuf_dqbuf
saa7146_vv: Unknown symbol v4l2_video_std_construct
saa7146_vv: Unknown symbol videobuf_queue_init
saa7146_vv: Unknown symbol v4l2_field_names
saa7146_vv: Unknown symbol videobuf_read_stream
saa7146_vv: Unknown symbol videobuf_querybuf
saa7146_vv: Unknown symbol videobuf_qbuf
saa7146_vv: Unknown symbol videobuf_read_one
saa7146_vv: Unknown symbol videobuf_iolock
saa7146_vv: Unknown symbol videobuf_streamon
saa7146_vv: Unknown symbol videobuf_queue_cancel
saa7146_vv: Unknown symbol videobuf_mmap_setup
saa7146_vv: Unknown symbol videobuf_mmap_mapper
dvb_ttpci: Unknown symbol saa7146_vv_init
dvb_ttpci: Unknown symbol saa7146_vv_release
dvb_ttpci: Unknown symbol saa7146_start_preview
dvb_ttpci: Unknown symbol saa7146_unregister_device
dvb_ttpci: Unknown symbol saa7146_register_device
dvb_ttpci: Unknown symbol saa7146_set_hps_source_and_sync
dvb_ttpci: Unknown symbol saa7146_stop_preview
---------------------------------------------------

Please help me, because I not find write proffesional answer for this
question.
For command IFCONFIG I don't see dvb0 device. And catalog /dev don't
have DVB subdirectory...

Full LSMOD output:
-------------------------------------------------------------------------------------------------------
Module                  Size  Used by
i915                   76997  2
parport_pc             24577  1
lp                     11565  0
parport                42249  2 parport_pc,lp
autofs4                24261  0
i2c_dev                10433  0
i2c_core               22209  1 i2c_dev
sunrpc                161701  1
ds                     17221  0
yenta_socket           18753  0
pcmcia_core            60937  2 ds,yenta_socket
dm_mod                 55253  0
button                  6609  0
battery                 8645  0
ac                      4933  0
md5                     4161  1
ipv6                  237569  10
uhci_hcd               31577  0
ehci_hcd               31557  0
dvb_core               86761  0
saa7146                17805  0
videodev                9537  0
ttpci_eeprom            2497  0
snd_intel8x0           34829  2
snd_ac97_codec         64529  1 snd_intel8x0
snd_pcm_oss            47865  0
snd_mixer_oss          17217  2 snd_pcm_oss
snd_pcm                98761  2 snd_intel8x0,snd_pcm_oss
snd_timer              30021  1 snd_pcm
snd_page_alloc          9801  2 snd_intel8x0,snd_pcm
gameport                5057  1 snd_intel8x0
snd_mpu401_uart         8897  1 snd_intel8x0
snd_rawmidi            26853  1 snd_mpu401_uart
snd_seq_device          8137  1 snd_rawmidi
snd                    54949  11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore              10145  2 snd
8139too                26305  0
mii                     4673  1 8139too
floppy                 58609  0
ext3                  121033  1
jbd                    75481  1 ext3
------------------------------------------------------------------------------------------------------

Full DMESG output:

NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1122373207.612:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 5B36F29B439C91FB
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SP0411N, ATA DISK drive
hdb: SAMSUNG CD-ROM SH-152A, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdb: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
USB1 USB2 USB3 EHCI ICHB PS2M PS2K UAR1  MC9
Freeing unused kernel memory: 148k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-1.667asp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xcc00, 00:0b:6a:a0:7b:63, IRQ 5
eth0:  Identified 8139 chip type 'RTL-8101'
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49319 usecs
intel8x0: clocking to 48000
hw_random: RNG not detected
Linux video capture interface: v1.00
saa7146_vv: Unknown symbol videobuf_streamoff
saa7146_vv: Unknown symbol videobuf_poll_stream
saa7146_vv: Unknown symbol videobuf_dma_pci_unmap
saa7146_vv: Unknown symbol videobuf_dma_free
saa7146_vv: Unknown symbol videobuf_reqbufs
saa7146_vv: Unknown symbol v4l_compat_translate_ioctl
saa7146_vv: Unknown symbol videobuf_waiton
saa7146_vv: Unknown symbol videobuf_dqbuf
saa7146_vv: Unknown symbol v4l2_video_std_construct
saa7146_vv: Unknown symbol videobuf_queue_init
saa7146_vv: Unknown symbol v4l2_field_names
saa7146_vv: Unknown symbol videobuf_read_stream
saa7146_vv: Unknown symbol videobuf_querybuf
saa7146_vv: Unknown symbol videobuf_qbuf
saa7146_vv: Unknown symbol videobuf_read_one
saa7146_vv: Unknown symbol videobuf_iolock
saa7146_vv: Unknown symbol videobuf_streamon
saa7146_vv: Unknown symbol videobuf_queue_cancel
saa7146_vv: Unknown symbol videobuf_mmap_setup
saa7146_vv: Unknown symbol videobuf_mmap_mapper
dvb_ttpci: Unknown symbol saa7146_vv_init
dvb_ttpci: Unknown symbol saa7146_vv_release
dvb_ttpci: Unknown symbol saa7146_start_preview
dvb_ttpci: Unknown symbol saa7146_unregister_device
dvb_ttpci: Unknown symbol saa7146_register_device
dvb_ttpci: Unknown symbol saa7146_set_hps_source_and_sync
dvb_ttpci: Unknown symbol saa7146_stop_preview
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem 1207ec00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000e400
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 3, io base 0000e800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 5, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02373a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
cdrom: open failed.
Adding 497972k swap on /dev/hda1.  Priority:-1 extents:1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0xd0020000) is not aligned on a size(0x180000) boundary

Thank you!


-- 
Best Regards,
 admin Fedorov Alex 8-0677148331                         mailto:admin at timag.org





More information about the linux-dvb mailing list