[linux-dvb] Two Cinergy 1200 DVB-C cards not working

Michal Vanco vanco at satro.sk
Wed Jun 29 17:06:49 CEST 2005


Hi,

I have latest 2.6.12.1 with patch provided by linuxtv.org. Two Terratic
Cinergy 1200 DVB-C cards are identified correctly according to dmesg:

<snip>
saa7146: register extension 'budget dvb /w video in'.
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
saa7146: found saa7146 @ mem d0956000 (revision 1, irq 5) (0x153b,0x1156).
DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
adapter failed MAC signature check
encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
budget-av: ci interface initialised.
KNC1-0: MAC addr = 00:0a:ac:01:e4:ac
DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level,
low) -> IRQ 12
saa7146: found saa7146 @ mem d0958000 (revision 1, irq 12) (0x153b,0x1156).
DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
adapter failed MAC signature check
encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
budget-av: ci interface initialised.
KNC1-1: MAC addr = 00:0a:ac:01:e4:80
DVB: registering frontend 1 (Philips TDA10021 DVB-C)...
</snip>

Everything seems to work fine except I'm not able to get adapter0
tunned. It simply doesn't lock to signal. Plugging the same cable with
the same signal to adapter1 gets adapter1 tuned correctly.

Where is the problem?

thankx
michal




More information about the linux-dvb mailing list