[linux-dvb] Hauppauge Nexus-S v2.3

[Kenneth Aafløy]

On Thursday 10 March 2005 23:08, you wrote:
> thank you for the patch. I just updatet the cvs and ran then patch. 
> Everything seems to load, except there is no crc32 modul. Is it 
> neccessary? I have a crc32c.ko.
> 
> ./insmod.sh:
> 
> Inserting DVB modules into kernel
> FATAL: Module crc32 not found.
> insmod: error inserting './b2c2-flexcop-pci.ko': -1 Unknown symbol in module

You don't use b2c2-flexcop, so no there's notting to worry about.

> Now testing with dvbscan:
> 
> ----------------------------------
> nordlicht:~ # dvbscan /usr/share/dvb/dvb-s/Astra-19.2E
> scanning /usr/share/dvb/dvb-s/Astra-19.2E
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 12551500 V 22000000 5
>  >>> tune to: 12551:v:0:22000
> WARNING: >>> tuning failed!!!
>  >>> tune to: 12551:v:0:22000 (tuning failed)
> WARNING: >>> tuning failed!!!
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
> ----------------------------------

Yuk, now you need to try out what Oliver said:

> > > First of all you should check whether 13V/18V voltage switching and
> > > 22kHz signal generation work. If not you have to find out how the LNBP20
> > > is wired to the GPIOs.

> Same as before. Then I made a test with the scan option of kaxtv. It 
> finds the frontend but shows on the terminal:

Well keep the tools to the simple stuff, dvbscan/szap.

Kenneth