[linux-dvb] Pinnacle PCTV Sat - FE HAS LOCK

[Kenneth Aafløy]

On Saturday 12 March 2005 01:01, Lukas Kasprowicz wrote
> I tried the cvs dvb-kernel.
> I got a 2.6.11-gentoo-r2 Kernel. Used makelinks with my kernel source and 
> compiled it.
> 
> My Problem with the "FE_DISEQC_SEND_BURST failed: Operation not supported" 
> disapeared, but now i have a new problem:
> 
> The card can not lock anymore.  I get no "FE_HAS_LOCK" on any channel. scan 
> does not work, too.
> 
> lspci:
> 0000:00:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 0000:00:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
> (rev 11)
> 
> lspci -nv:
> 0000:00:0c.0 Class 0400: 109e:036e (rev 11)
>         Subsystem: 11bd:001c
>         Flags: bus master, medium devsel, latency 32, IRQ 11
>         Memory at dddfe000 (32-bit, prefetchable)
>         Capabilities: [44] Vital Product Data
>         Capabilities: [4c] Power Management version 2
> 
> 0000:00:0c.1 Class 0480: 109e:0878 (rev 11)
>         Subsystem: 11bd:001c
>         Flags: bus master, medium devsel, latency 32, IRQ 11
>         Memory at dddff000 (32-bit, prefetchable)
>         Capabilities: [44] Vital Product Data
>         Capabilities: [4c] Power Management version 2

Your card is listed at
http://www.linuxtv.org/wiki/index.php/DVB_cards_requiring_definition

I'm wondering what that cards frontend is? What does it say on the tin-can?

Remember a picture speaks a 1000 words..
 and there is a gallery of video cards out there..

You might be required to open the tin-can, so if you can (it's not soldered),
you might as well note (or take a picture) of what is in there right away.

Kenneth