[linux-dvb] Terratec Cinergy 1200 DVB-T

Karsten Dello dello at mi.fu-berlin.de
Thu Mar 17 16:21:27 CET 2005


Hi,

I have exactly the same problem with a KNC-One-Card
running on debian sarge.
As far as I know the KNC-One-Card (without "plus")  is exactly the same 
card as the  Terratec 1200 DVB-T mentioned by Henrik.

i have tested the following kernels:
- 2.6.10 from debian unstable
- 2.6.10 selfcompiled
- 2.6.10 with the patch supplied by alexander riedel last week on this list.

With a channels.conf that "scan" produced  with a CinergyT2-USB-Box - 
which i had temporarily connected to the same machine -
even VDR works well with the KNC-One-Card!

But I cannot get "scan" to find a single station using the KNC-One-Card.

Any suggestions?


Best regards

Karsten




Henrik Jönsson wrote:
> Hi
> I'm trying to get my terratec dvb-t card to work under SUSE 9.2 with 
> kernel 2.6.11.3. But i can't get it to find any channels.
> this is how it looks when i do dmesg
> 
> Linux video capture interface: v1.00
> saa7146: register extension 'dvb'.
> saa7146: register extension 'budget dvb'.
> saa7146: register extension 'budget_ci dvb'.
> saa7146: register extension 'budget dvb /w video in'.
> ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 217
> saa7146: found saa7146 @ mem ffffc20000842000 (revision 1, irq 217) 
> (0x153b,0x1157).
> DVB: registering new adapter (Terratec Cinergy 1200 DVB-T).
> adapter failed MAC signature check
> encoded MAC from EEPROM was 
> ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
> KNC1-0: MAC addr = 00:0a:ac:01:a4:ef
> DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
> ciintf_init: CI interface initialised
> 
> with ./scan dvb-t/se-Emmaboda > channels.conf
> i get this
> 
> scanning dvb-t/se-Emmaboda
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 474000000 0 2 0 3 1 2 0
> initial transponder 530000000 0 2 0 3 1 2 0
> initial transponder 674000000 0 2 0 3 1 2 0
> initial transponder 730000000 0 2 0 3 1 2 0
>  >>> tune to: 
> 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> 
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> (tuning failed)
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> 
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> (tuning failed)
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> 
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> (tuning failed)
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> 
> WARNING: >>> tuning failed!!!
>  >>> tune to: 
> 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
> (tuning failed)
> WARNING: >>> tuning failed!!!
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
> 
> is there anyone out there that can help me?
> // Henrik
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb




More information about the linux-dvb mailing list