[linux-dvb] Pinnacle 200i

Rainer Schubert lintv at dl6hbo.inka.de
Thu Mar 17 21:56:51 CET 2005


On Thu, 17 Mar 2005, [iso-8859-15] François-Xavier Payet wrote:

> Ok, I've managed to pass the card option to the module. Now dmesg gives me :
>
> saa7130/34: v4l2 driver version 0.2.12 loaded
> ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 7 (level, low) -> IRQ 7
> saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 7, latency: 32, mmio:
> 0xde001000
> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
> [card=50,insmod option]
> saa7134[0]: board init: gpio is cc06000
> tda9885/6/7: chip found @ 0x86
> tuner 3-0060: chip found @ 0xc0 (saa7134[0])
> tuner 3-0060: microtune: companycode=3cbf part=42 rev=09
> tuner 3-0060: microtune MT2050 found, OK
> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: registered device video1 [v4l2]
> saa7134[0]: registered device vbi1
>
> Isn't it possible that the driver is looking for 2 tuners (as he thinks it is
> a 300i) and, finding only one, gives up with the DVB?

That looks much better to me. Sorry, but I forgot to mention you have to 
insmod / modprobe the mt352 module as well.

Regards,
Rainer
-- 
Rainer Schubert - Linux TV User


More information about the linux-dvb mailing list