[linux-dvb] Pinnacle 200i

François-Xavier Payet Francois-Xavier.Payet at ens.insa-rennes.fr
Fri Mar 18 18:07:08 CET 2005


Le Jeudi 17 Mars 2005 21:58, Rainer Schubert a écrit :
> On Thu, 17 Mar 2005, [iso-8859-15] François-Xavier Payet wrote:
> > Ok, so I must be very silly
> >
> > By doing just a "modprobe saa7134-dvb", dmesg gives me :
> >
> > saa7130/34: v4l2 driver version 0.2.12 loaded
> > ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 7 (level, low) -> IRQ 7
> > saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 7, latency: 32, mmio:
> > 0xde001000
> > saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL
> > [card=50,insmod option]
> > saa7134[0]: board init: gpio is cc06000
> > tda9885/6/7: chip found @ 0x86
> > tuner 3-0060: chip found @ 0xc0 (saa7134[0])
> > tuner 3-0060: microtune: companycode=3cbf part=42 rev=09
> > tuner 3-0060: microtune MT2050 found, OK
> > saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2
> > 92 saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff
> > ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff
> > ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
> > ff ff ff ff saa7134[0]: registered device video1 [v4l2]
> > saa7134[0]: registered device vbi1
> > saa7134[0]: pinnacle 300i dvb setup
> > DVB: registering new adapter (saa7134[0]).
> > DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
> >
> > Now, can anyone gives me a little tip on where to go now (software to
> > use, link to an howto, ...)
>
> Francois,
>   you are on the right path now.
>
> For a viewer you may take kaffeine-0.6-cvs or try xine first.
>
> Regards,
> Rainer

Just halting the PC and everything was fine (I guess it was because of a 
firmware upgrade. My dvb-t card is now working great under kaffeine / 
mplayer / ...

Thanks a lot all of you for your help

FX




More information about the linux-dvb mailing list