[linux-dvb] load_dram(): timeout at block 0

[CopyPoint]

>
>
>---------- I CHANGED BIOS SETTINGS AND NOW IT WORKS ------------
>
>I changed IRQs:
>
>BIOS: PnP/PCI Configuration
>
>PCI Slot 2/5 ->  7 instead of AUTO
>PCI Slot 3   -> 10 instead of AUTO
>
>Other slots: AUTO
>
>Only "problem" after booting linux:
>
>I had to insmoad load 3-4 times:
>
>1st: Can't load firmware for both cards -> unload
>2nd: Firmware for one card loaded -> unload
>3rd: Firmware for both cards loaded
>
>VDR start
>
>-> I reconfigured my remote control, but now
>(after 1h up and running) everything works.
>
>  -> changed from event device 3 to event device 2
>
>
>Does anybody know what's the problem with firmware loading?
>
>René


-- CONFIRMED --

I build in the card - and it just worked (I did some other pci-rearangement 
since the last test)
5V-Line goes down to 4.80V - so this didn't matter for that prob
insmod worked in first run for all three cards (a cinergy as second)

But hell:
at this moment i neither have analog sound (DD works) nor can switch to the 
2nd satelite (there are still some IRQ's shared)

my BIOS doesn't allow direct PCI - IRQ assignements - any further ideas for 
that??
does linux really behave so strange with shared IRQ's??

Thanx for all your help till here

         Thorsten