[linux-dvb] tda1004x update

[Michael Krufky]

Hartmut Hackmann wrote:

> I just committed an update of the tda1004x dvb-t driver to the dvb-kernel
> CVS. It only affects the tda10046 (hopefully):
>
> - fixed oddities at firmware download from eeprom.
> - more tolerant vs crystal frequency offset. It should now work with up
>   to -/+100ppm deviation. This can be the cause why some boards like
>   the Lifeview just didn't work for some users.
> - lower sampling clock to 48Mhz for low IF and 53MHz for 36MHz. Together
>   with some other minor changes, this increases the sensitivity a bit.
> - doesn't touch the GPIOs any longer. This needs to be handled by the
>   board layer.
>
> The latter change might cause incompatibilities. However, it is necessary
> since the pins are used very differently. I could not find problems with
> boards i have access to. 

Hartmut-

What is the status of the testings with this patch?  Your announcement 
mentions some possible incompatabilities...

Mauro has already send your v4l patches to -mm... Do they depend on this 
one?

-Michael Krufky