[linux-dvb] help new Cinergy T2 (aka newbie w/ cinergy T2)

[Alan Miller]

Hi everyone,

Just got a new Cinergy T2 DVB-T USB.
Using FC4 2.6.12.1_1398 on x86_64.

I'm not farmiliar at all with the pieces involved in getting this thing 
going.
Can somebody give me some pointers on next steps.

I installed the mythtv-suite from http://wilsonet.com/mythtv/atrpms.repo
It looks like I have the modules loaded. Anything important missing?
 
    [root at fedo ~]# lsmod |egrep "dvb|v4l|tda|video|saa|ttpci|budget"
    budget_ci              15041  0
    budget                 12105  0
    l64781                  8645  1 budget
    ves1820                 7237  1 budget   
    budget_core            14793  2 budget_ci,budget
    stv0299                13513  2 budget_ci,budget
    tda8083                 7237  1 budget
    ves1x93                 7877  1 budget
    ttpci_eeprom            3009  1 budget_core
    saa7146_vv             58561  0
    v4l2_common             8129  1 saa7146_vv
    videodev               12993  1 saa7146_vv
    saa7146                21193  4 budget_ci,budget,budget_core,saa7146_vv
    tda1004x               16453  1 budget_ci
    dvb_core              109181  3 budget_ci,budget,budget_core
    video_buf              29765  1 saa7146_vv
    v4l1_compat            13893  1 saa7146_vv
    i2c_core               27329  11 
budget_ci,budget,l64781,ves1820,budget_core,stv0299,tda8083,ves1x93,ttpci_eeprom,tda1004x,i2c_dev

The devices are created under /dev/dvb/adapter0/ and I can tzap.
(already have a channels.conf for Munich.)

    [root at athome ~]# ls /dev/dvb/adapter0/<tab>
    demux0  dvr0  frontend0  net0

    [root at athome ~]# ./tzap eurosport
    using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
    tuning to 834000000 Hz
    video pid 0x0241, audio pid 0x0242
    status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 |
    status 1f | signal c117 | snr 7474 | ber 00000000 | unc 0000001e | 
FE_HAS_LOCK
    status 1f | signal 7116 | snr 7878 | ber 00000000 | unc 00000046 | 
FE_HAS_LOCK
    status 1f | signal 2117 | snr 7878 | ber 00000000 | unc 00000073 | 
FE_HAS_LOCK
    status 1f | signal e117 | snr 7676 | ber 00000000 | unc 00000099 | 
FE_HAS_LOCK
    status 1f | signal 1117 | snr 7878 | ber 00000000 | unc 000000c9 | 
FE_HAS_LOCK
    status 1f | signal 6117 | snr 7878 | ber 00000000 | unc 000000f6 | 
FE_HAS_LOCK

But where do I go from here?
How can I verify the T2 is seeing a video stream.

Alan