[linux-dvb] Problem with dbv driver (onboard IR of Nexus S)

Pierre JUHEN pierre.juhen at wanadoo.fr
Tue Nov 22 21:53:58 CET 2005


Hi,

I just install a new PC with the latest Fedora Core 4 updates (kernel 
2.6.14.1_1637.FC4), and the latest vdr RPM from livna.

I have a problem with the on board IR that doesn't work.

Here is the /var/log/messages, with dvb_ttpci debug=16.

Nov 22 20:49:39 vdr kernel: saa7146: unregister extension 'dvb'. Nov 22 
20:49:39 vdr kernel: ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Nov 22 20:49:40 vdr hal.hotplug[2813]: DEVPATH is not set (subsystem input)
Nov 22 20:49:54 vdr kernel: Linux video capture interface: v1.00
Nov 22 20:49:54 vdr kernel: saa7146: register extension 'dvb'.
Nov 22 20:49:54 vdr kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link 
[LNKC] -> GSI 12 (level, low) -> IRQ 12
Nov 22 20:49:54 vdr kernel: saa7146: found saa7146 @ mem cc96c000 
(revision 1, irq 12) (0x13c2,0x0003).
Nov 22 20:49:54 vdr kernel: DVB: registering new adapter 
(Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Nov 22 20:49:54 vdr kernel: adapter has MAC addr = 00:d0:5c:20:f1:6d
Nov 22 20:49:54 vdr kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Nov 22 20:49:54 vdr kernel: dvb-ttpci: info @ card 0: firm f0240009, 
rtsl b0250018, vid 71010068, app 8000261f
Nov 22 20:49:54 vdr kernel: dvb-ttpci: firmware @ card 0 supports CI 
link layer interface
Nov 22 20:49:54 vdr kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Nov 22 20:49:54 vdr kernel: saa7146_vv: saa7146 (0): registered device 
video0 [v4l2]
Nov 22 20:49:55 vdr kernel: DVB: registering frontend 0 (ST STV0299 
DVB-S)...
Nov 22 20:49:55 vdr hal.hotplug[3004]: DEVPATH is not set (subsystem input)
[...]
Nov 22 21:05:10 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:10 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:10 vdr kernel: dvb-ttpci: GPIO0 irq oops @ 203490, 
psr:0xffffffff, ssr:0xffffffff
Nov 22 21:05:10 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:10 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): warning: interrupt 
enabled, but not handled properly.(0xe7f4fbf7)
Nov 22 21:05:11 vdr kernel: saa7146: interrupt_hw(): disabling interrupt 
source(s)!


_______

the error messages are link with the use of the remote control.

Thank you for your help.

Regards,
Pierre JUHEN










More information about the linux-dvb mailing list