[linux-dvb] stv099 enhanced tuning code gone

Oliver Endriss o.endriss at gmx.de
Thu Oct 6 17:37:02 CEST 2005


Andrew de Quincey wrote:
> As the subject says - lemme know this causes any problems...

I don't know if this causes any problems:
For philips_su1278 the old code set register 0x12 to 0xda in the
budget-ci driver. Now register 0x12 is overwritten with 0xb9.

What about these additional modifications:

Index: stv0299.c
===================================================================
RCS file: /cvs/linuxtv/dvb-kernel/linux/drivers/media/dvb/frontends/stv0299.c,v
retrieving revision 1.72
diff -p -u -r1.72 stv0299.c
--- stv0299.c   3 Oct 2005 14:20:43 -0000       1.72
+++ stv0299.c   6 Oct 2005 14:32:46 -0000
@@ -560,8 +560,6 @@ static int stv0299_set_frontend(struct d
        stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate);
        stv0299_writeregI(state, 0x22, 0x00);
        stv0299_writeregI(state, 0x23, 0x00);
-       stv0299_readreg (state, 0x23);
-       stv0299_writeregI(state, 0x12, 0xb9);

        state->tuner_frequency = p->frequency;
        state->fec_inner = p->u.qpsk.fec_inner;

Imho the deleted lines are not required (tested with BSRU6).
Register 0x12 should be set using xxx_inittab.
(inittabs for BSRU6/BSBE1 need to be adjusted: 0xb5 -> 0xb9,
for philips_su1278 0xda is used.)

Any comments?

Oliver

-- 
--------------------------------------------------------
VDR Remote Plugin available at
http://www.escape-edv.de/endriss/vdr/
--------------------------------------------------------



More information about the linux-dvb mailing list