[linux-dvb] Terratec Cinergy 1200 dvb-c (No such device)

[Steven]

 >
 > what shows "lspci -vvv -n -s 02:0e.0" ?
 > perhaps a new card revision with new hardware onboard? Are you really
 > sure that you got a Cinergy 1200 dvb-c?
 >
It said Cinergy 1200 dvb-c on the box :-)

lspci -vvv -n -s 02:0e.0
02:0e.0 Class 0480: 1131:7146 (rev 01)
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Latency: 64 (63750ns min, 63750ns max)
         Interrupt: pin A routed to IRQ 5
         Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=512]

So it looks like it is indeed the card listed here : 
http://linuxtv.org/wiki/index.php/Supported_DVB_cards#Terratec_Cinergy_1200_DVB-C_budget.2FKNC1_DVB-C

Just doing a modprobe budget-av gives me these modules :
lsmod
Module                  Size  Used by
budget_av              12800  0
saa7146_vv             42880  1 budget_av
budget_core             6788  1 budget_av
dvb_core               71336  2 budget_av,budget_core
saa7146                14600  3 budget_av,saa7146_vv,budget_core
ttpci_eeprom            2304  1 budget_core
stv0299                10248  1 budget_av
tda10021                5764  1 budget_av
tda1004x               13316  1 budget_av
cx8800                 26124  0
cx88xx                 51744  1 cx8800
ir_common               7044  1 cx88xx
v4l1_compat            13188  2 saa7146_vv,cx8800
bttv                  149648  0
video_buf              17156  4 saa7146_vv,cx8800,cx88xx,bttv
i2c_algo_bit            8712  2 cx88xx,bttv
v4l2_common             4864  3 saa7146_vv,cx8800,bttv
btcx_risc               3976  3 cx8800,cx88xx,bttv
tveeprom               10512  2 cx88xx,bttv
videodev                7168  4 saa7146_vv,cx8800,cx88xx,bttv
lirc_i2c                8196  0
i2c_core               16656  11 
budget_av,budget_core,ttpci_eeprom,stv0299,tda10021,tda1004x,cx88xx,bttv,i2c_algo_bit,tveeprom,lirc_i2c
lirc_dev               12516  1 lirc_i2c
snd_pcm_oss            45856  0
snd_mixer_oss          15744  1 snd_pcm_oss
nfsd                  210656  8
ipv6                  225600  12
nfs                   193224  2
lockd                  57608  3 nfsd,nfs
sunrpc                125380  4 nfsd,nfs,lockd
uhci_hcd               29584  0
ati_agp                 6668  1
shpchp                 91364  0
evdev                   7296  0
ohci_hcd               18436  0
ehci_hcd               29704  0
snd_atiixp             15968  0
snd_ac97_codec         75772  1 snd_atiixp
snd_pcm                74888  3 snd_pcm_oss,snd_atiixp,snd_ac97_codec
snd_timer              19588  1 snd_pcm
snd                    42980  6 
snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
soundcore               6880  1 snd
snd_page_alloc          8200  2 snd_atiixp,snd_pcm
3c59x                  37416  0
mii                     4608  1 3c59x
pcmcia                 30368  0
firmware_class          7424  4 budget_av,tda1004x,bttv,pcmcia
yenta_socket           21516  0
rsrc_nonstatic         11136  1 yenta_socket
pcmcia_core            34320  3 pcmcia,yenta_socket,rsrc_nonstatic
agpgart                28616  1 ati_agp
psmouse                29956  0
xfs                   540952  1
exportfs                4608  2 nfsd,xfs
ntfs                  182672  0
dm_mod                 49596  0

I've downloaded and applied this patch 
(http://linuxtv.org/downloads/patches/2.6.13/DVB-2.6.13.patch.bz2)  to 
my kernel and recompiled but still:  failed to open 
'/dev/dvb/adapter0/frontend0'

Is there any char-major alias that has to be defined in modprobe.conf ?

For my ivtv card (that I have now disabled while testing the DVB card) I 
had to do a :

alias char-major-81 videodev
alias char-major-81-0 ivtv

Do I have to add lines like this for the 212 device?

Steven