[linux-dvb] Tuner for Laptop Asus W2V Question

Michael Krufky mkrufky at linuxtv.org
Fri Oct 21 23:04:13 CEST 2005


Philippe Le Gal wrote:
> Hi,
> 
> I 've sucessfully compiled and installed last CVS video4linux on my Asus W2V 
> laptop with suse 10.
> 
> Now, I can load module with no error
> 
> modprobe saa7134 card=78 tuner=54
> 
> and dmesg give :
> 
> Linux video capture interface: v1.00
> video_buf: module not supported by Novell, setting U taint flag.
> saa7134: module not supported by Novell, setting U taint flag.
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
> IRQ 11
> saa7133[0]: found at 0000:03:02.0, rev: 209, irq: 11, latency: 64, mmio: 
> 0xfeafa800
> saa7133[0]: subsystem: 5168:0307, board: ASUSTeK P7131 Dual [card=78,insmod 
> option]
> saa7133[0]: board init: gpio is 50000
> saa7133[0]: i2c eeprom 00: 68 51 07 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: 00 ff 62 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff 1c 00 c0 ff 10 07 01 c2 96 00 16 22 15 ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner: module not supported by Novell, setting U taint flag.
> tuner 0-004b: chip found @ 0x96 (saa7133[0])
> tuner 0-004b: setting tuner address to 61
> tuner 0-004b: tuner: type set to tda8290+75

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This is a tuner new module... Please re-post your question on the 
video4linux mailing list, so that the v4l developers can see it.  To 
subscribe:

https://www.redhat.com/mailman/listinfo/video4linux-list

> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7133[0]: registered device radio0
> 
> but tvtime doesn't work (no signal on tv channel)
> 
> Any idea?
> 
> Thanks
> 
> Philippe
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb




More information about the linux-dvb mailing list