[linux-dvb] Separating / conditionalizing pll code from within nxt200x module

[Michael Krufky]

Michael Krufky wrote:

> Kirk Lapray wrote:
>
>> The reason it was hard coded only for this tuner is because I thought 
>> this was the only tuner that worked this way.  Now that we know the 
>> A180 is also this way, and that these are the only NXT2004 based 
>> cards that I am aware of, it would probably be the easiest to just 
>> write directly to the tuner on all NXT2004 based card.  Just put a 
>> switch statement to write to the tuner on NXT2004 based cards and to 
>> the NXT chip on NXT2002 based cards.  This way we would not have to 
>> have to have to add another parameter.
>
> 1) If it is nxt2004, then use "direct pll write" method, if nxt2002, 
> use "nxt pll write" method.
>
> Sounds like this is the method preferred by Kirk, and the easiest one 
> to implement.  This is probably the choice that makes the most sense.

Done... I'm happy with this route.  We can change to the callback method 
later on if necessary, but I dont think there will be any need.

-Michael Krufky