[linux-dvb] FusionHDTV 5 Lite tuner type not set

Jate jate.sujj at gmail.com
Mon Oct 31 02:39:36 CET 2005


I have recompiled after applying the patch. It appears to detect the
devices, but analog does not work. The messages from executing tvtime
follow.

Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:11.0, irq: 11, latency: 64, mmio:
0xcddfe000
bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is
18ac:d500
bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=64
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 64 (LG TDVS-H062F/TUA6034)
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
bt878(0): Bt878 (rev 17) at 00:11.1, irq: 11, latency: 64, memory:
0xcddff000
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:13.2[C] -> Link [LNKC] -> GSI 3 (level, low) ->
IRQ 3

messages from tvtime:
bttv0: timeout: drop=43 irq=289/289, risc=039b2024, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: timeout: drop=59 irq=306/306, risc=03fb001c, bits: VSYNC HSYNC OFLOW
FDSR
bttv0: reset, reinitialize
bttv0: timeout: drop=75 irq=323/323, risc=039b2024, bits: VSYNC HSYNC OFLOW
FDSR
bttv0: reset, reinitialize

- Jate S.

On 10/30/05, Michael Krufky <mkrufky at m1k.net> wrote:
>
> Jate wrote:
>
> > This morning, I changed to a vanilla 2.6.14 kernel, and analog started
> > working with tvtime. The dvb driver did not detect, however.
> >
> > I then tried the patch, but analog stopped working, and dvd was still
> > not detected.
> >
> > Ricardo: I am going to try your patch to bttv-i2c on the current CVS
> next.
> >
> >
> Jate-
>
> 2.6.14 has analog support for FusionHDTV5 Lite, but dvb support is only
> in cvs.
>
> Ricardo has sent another patch to try (attached)
>
> If you can, please join us in #v4l chat room at irc.freenode.net<http://irc.freenode.net>
>
> We are trying to fix this right now, the attached patch should work
> against current cvs. All we need is confirmation that it works now
> before we apply it.
>
> Thank you.
>
> -Michael Krufky
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051030/578776e4/attachment.htm


More information about the linux-dvb mailing list