[linux-dvb] Re: Anysee E30 USB2 DVB-T support?

[Pekka.Panula at sofor.fi]

Hi

I just scanned dvb-t channels and i got these results:
root at ramses:~/dvb/linuxtv-dvb-apps-1.1.0/util/scan# scan -o vdr 
/root/fi-lapua
scanning /root/fi-lapua
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 610000000 0 2 0 3 1 2 0
initial transponder 602000000 0 2 0 3 1 2 0
initial transponder 746000000 0 2 0 3 1 2 0
>>> tune to: 610000:I999B8C23D0M64T8G8Y0:T:27500:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 602000:I999B8C23D0M64T8G8Y0:T:27500:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 746000:I999B8C23D0M64T8G8Y0:T:27500:
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.

my /root/fi-lapua is:
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 610000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 602000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 746000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE

it should be right.

So i am thinking anysee E30 does not work with twinhan alpha firmware?

Terveisin/Regards,
   Pekka Panula, Net Servant Oy - A Sofor company
   pekka.panula at sofor.fi


Pekka Panula/Sofor wrote on 07.09.2005 22:17:56:

> Hi
> 
> Interesting, i can use dvb-usb-vp7045 driver (twinhan alpha) as you 
> said, well atleast it starts (loads vp7045 driver) and i am using 
> twinhan alpha firmware and i have /dev/dvb/adapter0/ directory and 
> files demux0, dvr0, frontend0 and net0, but what now, how can i test 
it's ok?
> 
> Terveisin/Regards,
>    Pekka Panula, Net Servant Oy - A Sofor company
>    pekka.panula at sofor.fi

> 
> linux-dvb-bounces at linuxtv.org wrote on 07.09.2005 11:58:51:
> 
> > Hi,
> > 
> > On Fri, 2 Sep 2005, Heikki Hannikainen wrote:
> > > On Tue, Aug 16 2005 Patrick Boettcher wrote:
> > >> Also every other technical detail (high-res picture of the innards, 
and
> > >> descriptions and labels from the box's case) can be helpful, too. 
But
> > >> the usbsnoop-log is the most important help.
> > >
> > >  Pekka apparently provided everything else already, here are 
thephotos of 
> > > this little box:
> > >
> > >  http://jellona.antila.iki.fi/~antila/anysee-e30-1.jpg
> > >  http://jellona.antila.iki.fi/~antila/anysee-e30-2.jpg
> > 
> > Interesting. The device uses the same tuner as the Twinhan Alpha. I'm 
> > wondering if the the rest of the stick/box is also identical to the 
Alpha.
> > 
> > If so, it could be worth a try to load the firmware of the Alpha and 
see 
> > if the E30 will work with the Alpha-driver (vp7045), too. But it is 
risky, 
> > because the firmware can damage your E30...
> > 
> > The best way would be to have the specs from the vendor 
> > (http://anysee.com/), but they also denied to make them public to help 

> > developers write OpenSource driver.
> > 
> > The second best way would be to reverse-engineer the windows driver 
with 
> > usbsnoop or something, but this is very time-cosuming.
> > 
> > Also, there are plenty of other USB2 device working 100% in Linux. 
(There 
> > is actually a good list of supported device in the DVB wiki, but 
currently 
> > unavailable, because of very very stupid idiots).
> > 
> > At this point I would strongly recommend not to buy AnySee products 
when 
> > running them in Linux, until they are going to change their minds.
> > 
> > best regards,
> > Patrick.
> > 
> > --
> >    Mail: patrick.boettcher at desy.de
> >    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/
> > 
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050907/c4781b08/attachment.htm