[linux-dvb] ca_zap with word wrap .. sry for previous post

Lee Hammerton savoury.snax at bulldoghome.com
Thu Sep 8 00:50:21 CEST 2005


Manu Abraham wrote:

>
> I had this one fixed in latest CVS .. It should detect the card by 
> itself. If you could test it from the CVS that would be nice.


 Just got latest cvs.. and although it finds the card ok. all the output 
on all channels is completely scrambled (looks kinda pretty)

I'll try rolling back till i get a working version.

dmesg output :

bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 20, latency: 32, mmio: 
0xfc000000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 
1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f700fd [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 16 (level, low) -> IRQ 20
bt878(0): Bt878 (rev 17) at 00:09.1, irq: 20, latency: 32, memory: 
0xfc001000
DVB: registering new adapter (bttv0).
dst_get_device_id: Recognise [DTT-CI]

DST type flags : 0x1 newtuner 0x2 ts204 0x10 firmware version = 2
dst_get_mac: MAC Address=[00:08:ca:14:10:00]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0001292000013b95]
dst_ca_attach: registering DST-CA device
DVB: registering frontend 0 (DST DVB-T)...

dst_ca_open:  Device opened [c1667480]
dst_ca_ioctl:  Getting Slot capabilities
put_checksum:  ========================= Checksum calculation 
==================
=========
put_checksum:  String Length=[0x07]
put_checksum:  String=[
 07 40 02 00 02 00 00 ]
put_checksum: Sum=[4b]

put_checksum:  Checksum=[b5]
put_checksum:  
=================================================================
=========
dst_put_ci:  Put Command
ca_get_slot_caps:  -->dst_put_ci SUCCESS !
ca_get_slot_caps:  Slot cap = [1]
===================================
 10 64 0 0 2 3 0 1
dst_ca_ioctl:  -->CA_GET_CAP Success !
dst_ca_release:  Device closed.
dst_ca_open:  Device opened [d59c6e80]
dst_ca_ioctl:  Getting Slot capabilities
put_checksum:  ========================= Checksum calculation 
==================
=========
put_checksum:  String Length=[0x07]
put_checksum:  String=[
 07 40 02 00 02 00 00 ]
put_checksum: Sum=[4b]

put_checksum:  Checksum=[b5]
put_checksum:  
=================================================================
=========
dst_put_ci:  Put Command
ca_get_slot_caps:  -->dst_put_ci SUCCESS !
ca_get_slot_caps:  Slot cap = [1]
===================================
 10 64 0 0 2 3 0 1
dst_ca_ioctl:  -->CA_GET_CAP Success !
dst_ca_release:  Device closed.
---
[This E-mail has been scanned for viruses but it is your responsibility 
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]




More information about the linux-dvb mailing list