[linux-dvb] pinnacle success or not

[Nando Romano]

why you have this dmesg ?
for Lukas Kasprowicz and everyone who is interestend
to the discussion

my dmesg output:
--------
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for
capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] ->
GSI 10 (level, 
low) -> 
IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10,
latency: 32, mmio: 
0xdddfe000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI
subsystem ID is 
11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=009f00fd
[init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "dvb0"
bttv: Bt8xx card found (1).
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] ->
GSI 11 (level, 
low) -> 
IRQ 11
bttv1: Bt878 (rev 17) at 0000:00:0c.0, irq: 11,
latency: 32, mmio: 
0xdddfc000
bttv1: detected: Pinnacle PCTV Sat [card=94], PCI
subsystem ID is 
11bd:001c
bttv1: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=009f00fc
[init]
bttv1: using tuner=-1
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 . ok
bttv1: add subdevice "dvb1"
bt878: DVB driver version 0.0.1 loaded
bt878(0): DVB interface found.
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] ->
GSI 10 (level, 
low) -> 
IRQ 10
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 10, latency:
32, memory: 
0xdddff000
bt878(1): DVB interface found.
ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] ->
GSI 11 (level, 
low) -> 
IRQ 11
bt878(1): Bt878 (rev 17) at 00:0c.1, irq: 11, latency:
32, memory: 
0xdddfd000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (Conexant CX24110
DVB-S)...
DVB: registering new adapter (bttv1).
DVB: registering frontend 1 (Conexant CX24110
DVB-S)...
--------

do you have use the same modules which I loaded?


your system see two different dvb-s card for your
pinnacle card while my system see a dvb-s and a dvb-t
card

What's your kernel?
What's the release of your dvb driver?

If i don't excute 
modprobe bttv i2c_hw=1 card=0x68
the system see my pinnacle card as an analog device 
(in fact if I execute 
modprobe bttv 
or 

# modprobe bttv i2c_hw=1 card=0x5E
# modprobe dvb-bt8xx
# modprobe cx24110
-----------

and dmesg show me

------------
Linux video capture interface: v1.00
[drm] Loading R200 Microcode
v4l2_common: unsupported module, tainting kernel.
video_buf: unsupported module, tainting kernel.
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for
capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level,
low) -> IRQ 177
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 177,
latency: 64, mmio: 0xf7c00000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI
subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,insmod
option]
bttv0: gpio: en=00000000, out=00000000 in=009f00fc
[init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 19 (level,
low) -> IRQ 177
bt878(0): Bt878 (rev 17) at 02:07.1, irq: 177,
latency: 64, memory: 0xf7d00000



Thanks a lot


	

	
		
___________________________________ 
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB 
http://mail.yahoo.it