[linux-dvb] Pluto2 - can't tune frequency

Michal Semler cijoml at volny.cz
Sat Sep 10 13:33:00 CEST 2005


Dne st 7. září 2005 11:14 Michal Semler napsal(a):
> Dne st 7. září 2005 11:07 jste napsal(a):
> > On Wed, 7 Sep 2005, Michal Semler wrote:
> > > Hi,
> > >
> > > I am sure it is correct. It is taken from kaffeine config file and
> > > works with my desktop card.
> > >
> > >> T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO
> >
> > *Please* give it a try anyway.
>
> OK I will
>
> > Hmm, do you have any higher frequency than 674 MHZ which is working in
> > Linux?

scan init >> .mplayer/channels.conf
scanning init
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 818000000 0 9 9 6 2 4 4
>>> tune to: 
818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO
0x0000 0x0001: pmt_pid 0x0000 CTc -- - CT1 (running)
0x0000 0x0002: pmt_pid 0x0000 CTc -- - CT2 (running)
0x0000 0x000b: pmt_pid 0x0000 CTc -- - CRo 1 Radiozurnal (running)
0x0000 0x000c: pmt_pid 0x0000 CTc -- - CRo 2 Praha (running)
0x0000 0x000d: pmt_pid 0x0000 CTc -- - CRo 3 Vltava (running)
0x0000 0x000e: pmt_pid 0x0000 CTc -- - CRo Regina (running)
0x0000 0x0010: pmt_pid 0x0000 CTc -- - Country (running)
0x0000 0x0011: pmt_pid 0x0000 CTc -- - Expres (running)
Network Name 'Cesky Telecom'
>>> tune to: 
738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 
738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 
506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
Network Name 'Cesky Telecom'
0x0000 0x0001: pmt_pid 0x0100 CRa -- CT2. (running)
0x0000 0x0002: pmt_pid 0x0101 CRa -- Nova. (running)
0x0000 0x0003: pmt_pid 0x0102 CRa -- CT1. (running)
0x0000 0x0004: pmt_pid 0x0105 CRa -- Prima. (running)
0x0000 0x0005: pmt_pid 0x0107 CRa -- Ocko. (running)
0x0000 0x0006: pmt_pid 0x0104 CRa -- Radiozurnal. (running)
0x0000 0x0007: pmt_pid 0x0106 CRa -- Praha. (running)
0x0000 0x0008: pmt_pid 0x0103 CRa -- Vltava. (running)
0x0000 0x000a: pmt_pid 0x010a CRa -- Frekvence1. (running)
dumping lists (17 services)

Do you see? Higher 818 works...

Michal

>
> # DVB-T Praha (Prague, Czech Republic)
> # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
> T 506000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
> T 674000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
> T 818000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
>
>
> This is a list which I am able to tune in windows and also in my second
> card. I am not sure for now if I was able to tune 818 frequency with pluto,
> because it is not important for me. It is only testing for now.
>
> Michal
>
> > Patrick.
> >
> > --
> >    Mail: patrick.boettcher at desy.de
> >    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/

-- 
S pozdravem

Michal Semler



More information about the linux-dvb mailing list