[linux-dvb] Pluto2 - can't tune frequency

Michal Semler cijoml at volny.cz
Sat Sep 10 14:10:11 CEST 2005


Dne so 10. září 2005 14:03 jste napsal(a):
> On Sat, 10 Sep 2005, Michal Semler wrote:
> > Dne st 7. záYí 2005 11:07 jste napsal(a):
> >> On Wed, 7 Sep 2005, Michal Semler wrote:
> >>> Hi,
> >>>
> >>> I am sure it is correct. It is taken from kaffeine config file and
> >>> works with my desktop card.
> >>>
> >>>> T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO
> >>
> >> *Please* give it a try anyway.
> >
> > echo "T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO" > init
> >
> > scan init >> .mplayer/channels.conf
> > scanning init
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > initial transponder 674000000 0 9 9 6 2 4 4
> >
> >>>> tune to:
> >
> > 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANS
> >MISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO WARNING: filter
> > timeout pid 0x0011
> > WARNING: filter timeout pid 0x0000
> > WARNING: filter timeout pid 0x0010
> > dumping lists (0 services)
> > Done.
> >
> > Not working :(
>
> But there is a lock, otherwise you wouldn't get the timeouts, but a
> "tuning failed". Can you try the frequency in Windows with the antenna in
> the same position? When you find a working position, reboot to Linux and
> try again the line above.

Hi, I am using antenna build in my house (group antenna for all flats). In 
windows it works like a charm, but linux says this. There are no errors in 
picture in windows and in windows value of uncorrected bits is still 0

Michal

>
> HTH,
> Patrick.
>
> --
>    Mail: patrick.boettcher at desy.de
>    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/

-- 
S pozdravem

Michal Semler



More information about the linux-dvb mailing list